topic Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords in Internet

Gigahub does NOT allow clients to connect with 63-character wifi passwords

ac3MHN — Sun, 25 Dec 2022 16:31:51 GMT

(Hopefully this report will get filed as a defect in gigahub firmware...)

My new gigahub will accept a 63-character wifi password, but won't allow clients to connect to it using that password. My previous HH4k worked perfectly fine in this respect.

I did confirm the gigahub accepted the password correctly via email notification, and both hub and wifi client both use pasted values so I know the data entry is correct.

(I've since been forced to use a shorter password. I don't know at what password length the gigahub stops accepting connections; the process to test this is tedious and always involves a factory reset to regain access to the hub.)

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

AlexS — Mon, 26 Dec 2022 06:57:07 GMT

Woooow why do you need a password of such length

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

BellPatricia — Tue, 03 Jan 2023 16:10:00 GMT

Hi there @ac3MHN. Thanks for your post, and welcome to the Bell Community 🙂

Very interesting. Is this affecting all of your clients, or just one?

In order to look into this further we have sent you a private message. Please check your Messages within your profile avatar in the top right corner.

Unsure how to check or send a private message? See How to send a private message

- Patricia

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

ac3MHN — Fri, 06 Jan 2023 20:26:36 GMT

@BellPatricia No clients are able to connect after setting a 63-character wifi password.

@AlexS it is obviously overkill but I work in a computer security company and (before) opted to use the most secure mechanisms I could use.

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

BellPatricia — Mon, 09 Jan 2023 18:17:19 GMT

Hey there @ac3MHN, thanks again for bringing this to our attention.

Just wanted to post a quick update to let you know that we've flagged this to the right team, and they are working on a resolution. We will post new information as it becomes available.

In the meantime, you should be able to use a 60 character password without issue.

- Patricia

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

SecureUser — Fri, 05 Apr 2024 21:35:07 GMT

Bell technicians installed a Giga Hub (FAST 5689E) modem in my home earlier today and I can confirm that it still only supports a maximum of 60 characters for the Wi-Fi network password. It has been over one year since we were informed above that this issue was flagged to a team to work on a resolution. Could you please provide an update?

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

DrZ — Sat, 19 Apr 2025 22:20:12 GMT

Interesting. I found this because I've been using a 63 character password on my HH4k for years and clients can no longer connect using that password as of last week. It seems like rather than fix the issue on the Giga Hub they've pushed a new firmware update to the HH4k that's added the same restriction. I've noticed that it just truncates the last 3 characters so I don't need to change the password per se on the modem, but need to remove those characters from the client to connect. The issue is that I have numerous smart devices using the original 63 character password and it's going to be a major pain to switch those to a new or truncated password.

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

dks — Sun, 20 Apr 2025 00:22:54 GMT

There has been no recent change in the Giga Hub firmware beyond version 2.13. Bell does not comment on future plans or updates, at least in my experience over the last thirty years as a Bell Internet client.

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

Efok — Sat, 25 Oct 2025 01:44:01 GMT

They did something to my gigahub 2.0 last night and disconnected all of my wifi devices. I am using a 63 character password for the longest time and now only a 60 character password is usable. I've verified that even a 61 character password would not allow a client to connect. Somehow bad firmware got pushed to my bell gigahub 2.0

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

dks — Sat, 25 Oct 2025 19:03:57 GMT

What firmware is shown in your Giga Hub 2.0?

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

Efok — Sat, 25 Oct 2025 19:20:22 GMT

It says firmware 3.11.3

Rescue version: SGM831000156

Hardware version: 5697-000001-000

Re: Gigahub does NOT allow clients to connect with 63-character wifi passwords

dks — Mon, 27 Oct 2025 14:54:32 GMT

Interesting. 3.11 was the original release. Bell must be doing incremental upgrades. I have 3.11.3. Why such a long password?