https://forum.bell.ca/t5/internet/pppoe-using-chelsio-t520/m-p/12351#M3477 <P>I found the solution in another forum:</P><P>Add "hw.cxgbe.buffer_packing=0" to /boot/loader.conf.local</P><P>to fix this issue if you have the same problem.</P> Thu, 29 Dec 2022 01:15:57 GMT stefhen 2022-12-29T01:15:57Z https://forum.bell.ca/t5/internet/pppoe-using-chelsio-t520/m-p/12322#M3472 <P><SPAN>Hi,</SPAN><BR /><BR /><SPAN>I am using a Chelsio T520-CR 2x SFP+ 10G NIC and I am unable to make PPPoE working using one of this card interface.</SPAN><BR /><SPAN>Using another card like the Intel 1000 there is no issue with exactly the same configuration.</SPAN><BR /><SPAN>My operating system is FreeBSD 13.1-RELEASE-p3 / OPNsense 22.7.8-amd64</SPAN><BR /><BR /><SPAN>Using the Chelsio NIC the pppoe authentication is made without issue, I'm getting a public address from BELL, I can even ping any public address from the LAN side of my network (icmp traffic is working fine), but I am unable to access a web site or other internet protocols (http, https, ssh etc...)</SPAN><BR /><BR /><SPAN>I've found a thread talking about the same problem but it's quite old:</SPAN><BR /><SPAN>»</SPAN><A href="https://forum.netgate.com/topic/136399/chelsio-t520-not-working-as-wan-interface" target="_blank">forum.netgate.com/topic/ ··· nterface</A><BR /><BR /><SPAN>I would like to know if someone tried pppoe using this card recently?</SPAN><BR /><BR /><SPAN>Thanks</SPAN></P> Wed, 28 Dec 2022 18:51:19 GMT https://forum.bell.ca/t5/internet/pppoe-using-chelsio-t520/m-p/12322#M3472 stefhen 2022-12-28T18:51:19Z https://forum.bell.ca/t5/internet/pppoe-using-chelsio-t520/m-p/12351#M3477 <P>I found the solution in another forum:</P><P>Add "hw.cxgbe.buffer_packing=0" to /boot/loader.conf.local</P><P>to fix this issue if you have the same problem.</P> Thu, 29 Dec 2022 01:15:57 GMT https://forum.bell.ca/t5/internet/pppoe-using-chelsio-t520/m-p/12351#M3477 stefhen 2022-12-29T01:15:57Z