topic Wondering how I can turn off/on the wi fi signal of my router to have more control in Internet

Can I turn off Wi-Fi broadcasting?

MindfulGal — Fri, 16 Feb 2024 13:44:45 GMT

Is there a way to turn my wi-fi off on the modem besides just unplugging everything. Thank you.

Re: Turn off Wi-Fi

BellPatricia — Mon, 18 Jul 2022 18:05:39 GMT

Hi @MindfulGal, thanks for your post and welcome to the Bell Community. Great suggestion @AlexS 🙂

When you log into your modem portal via 192.168.2.1 select Manage my Wi-Fi to turn Whole Home Wi-Fi ON & OFF.

You should then see the Advanced Wi-Fi Setting menu. From there you can turn off the Wi-Fi radios by using the ON/OFF slider.

Re: Turn off Wi-Fi

gmd — Mon, 19 Sep 2022 00:06:18 GMT

Hi, I just got Bell FTTH this week. I simply cannot shut the 5.0 Ghz WiFi off! When I disable it, it comes back as a hidden network. Disabling does not mean to stop broadcasting the SSID, it means to shut if off.

I suspect that the 6.0 Ghz does the same.

The WiFi power slider seems to be broken, too. 10% is 1/10, a tenth of the strength. Not a few dB less than 100%.

Re: Turn off Wi-Fi

dks — Mon, 26 Sep 2022 20:29:08 GMT

I believe there are still hidden wifi channels which support Fibe TV and the pods which remain active. You can turn off some but not all wireless signals. It also depends on the modem.

Re: Turn off Wi-Fi

gmd — Wed, 12 Apr 2023 21:13:52 GMT

Hi Patricia, a simple wifi analyzer on Android shows the hidden signal (hidden as having no broadcasted SSID).

Also, after turning 5.0 Ghz and 6.0 Ghz off, if I go under "Advanced tools and settings" / "Diagnostics", I see that 6.0 Ghz is off, but not 5.0 Ghz.

Wondering how I can turn off/on the wi fi signal of my router to have more control

lex — Tue, 25 Jul 2023 14:12:16 GMT

HI there I would like to know how I can access my router and turn the wifi signal on and off or set the time of day when I want it to go off. That way I can control the kids access to it at any given time. I.e. Like when its time for lights out and go to bed

Re: Wondering how I can turn off/on the wi fi signal of my router to have more control

WelshTerrier — Thu, 05 Nov 2026 15:00:06 GMT

There is no simple way of doing this with just an on or off button or time of day set to turn off your Wi-Fi with your modem

Here are two methods of controlling Wi-Fi:

1. Bell Modem

When you log into your modem portal via 192.168.2.1 select Manage my Wi-Fi to turn Whole Home Wi-Fi ON & OFF. You should then see the Advanced Wi-Fi Setting menu. From there you can turn off the Wi-Fi radios by using the ON/OFF slider.

2. Bell Wi-Fi app

This a much simpler & easier method of controlling your devices & their usage.

What is the Bell Wi-Fi app and how do I use it?

What is the Bell Wi-Fi app and how do I use it? : Installing the Bell Wi-Fi app

Managing your connected devices

Managing your connected devices

View devices and connection information.

View all the devices connected to your Wi-Fi network.

Open the Bell Wi-Fi app and log in with your MyBell username and password.
Touch the devices icon at the bottom of the home screen.

Under the device name, you can see how long it has been online or when it was last connected to your network. If a device is offline for more than two weeks, it will be removed from the list.

Select a device to learn more about it.

Under the device name, you’ll see it’s connection quality rating, what channel it’s on and other device details.

Touch a device name to change its name, or touch the menu icon (three dots) in the top right corner and select Rename device.

Block or pause Internet access by device

Quickly pause Internet access for a device, or schedule regular times when a device will be blocked from accessing the Internet.

Open the Bell Wi-Fi app and log in with your MyBell username and password.
Touch Devices at the bottom of the home screen.
Select the device you wish to block Internet access.
To pause Internet access immediately, touch Pause.

Touch Pause once to block Internet access for 15 minutes, twice for 30 minutes, or a third time to remove the block.

To schedule times when Internet access is blocked, touch Block Internet access.

Select one of the available options to block the device for a period of time:

Until end of day
School nights
Bedtime
Indefinitely
Custom

Note: You can customize the time range for the school nights, bedtime, and custom options by touching the time stamp above the option.

Touch Set Internet block.
To unblock a device, touch the X next to the Internet block on the device page, and then touch Unblock.

Keep in mind that this feature only limits Internet access from your Wi-Fi network. Cellular data can still be used while this function is enabled and downloaded content may still be accessible.

Re: Turn off Wi-Fi

gmd — Sun, 03 Sep 2023 18:05:03 GMT

What if you run it in bridge mode?

Re: Turn off Wi-Fi

ZaneP — Sun, 03 Sep 2023 19:46:50 GMT

Bell's modems can't be connected in bridge mode, so they can't be entirely bypassed. You would run PPPoE (Ontario; Quebec) or DHCP (Atlantic Canada) to connect a router.

So even if you turn off wifi on the modem and enable it on your router, there's no guarantee of completely disabling all the radios. Just something as simple as a firmware update on the modem will launch a reboot.

Can I turn off Wi-Fi broadcasting?

ChP — Fri, 16 Feb 2024 13:44:53 GMT

Hello,

i would like to turn off the Wi-Fi when i go to sleep and was wondering if there was a way to shut off the Wi-Fi from the Bell app or Bell Wi-Fi app for iphone?!

I have a HH4000

thank you,

Can I turn off Wi-Fi broadcasting?

Lizzie99 — Tue, 06 Aug 2024 12:28:29 GMT

Cannot seem to find any WIFI parameters to stop broadcasting my SSID

Re: Home Hub 4000 - How do I configure the modem to not display my SSID

WelshTerrier — Sat, 03 Aug 2024 12:00:13 GMT

Good Day.

I am not sure why you would want to do this. Your system is not going to be any more secure by doing so. It will also create additonal manual set up for your devices.

There is no option per se to just turn off Home Hub 4000 SSID from displaying. You can disable the SSID broadcast if you turn off Whole Home Wi-Fi.

To do so, please follow the steps included in this helpful reply:

Solved: Re: Home Hub 4000 SSID broadcast off - Page 2 - Bell

Take care

Re: Home Hub 4000 - How do I configure the modem to not display my SSID

schultzter — Wed, 04 Sep 2024 21:31:25 GMT

I have my own access point, in a much better location than the Home Hub 3000 (HH3k), so I have disabled the Whole Home Wi-Fi and turned off the radios in the HH3k (that I can). But I still see devices connected to the Wi-Fi on the HH3k! How can they connect if the Wi-Fi is disabled? Who is connecting? How can I prevent them from connecting?

Re: Primary Wi-Fi is disabled but devices are connecting

WelshTerrier — Wed, 04 Sep 2024 11:18:11 GMT

There is no option per se to just turn off Home Hub 3000 SSID from displaying. You can disable the SSID broadcast if you turn off Whole Home Wi-Fi.

To do so, please follow the steps included in this helpful reply:

Home Hub 3000

Log into Home Hub 3000 admin GUI on Web by entering 192.168.2.1 in the browser address bar
Click on Manage my Wi-Fi
If prompted, enter password: admin
You should then see the Wi-fi settings. Turn Off the Primary Wi-Fi network and Guest Wi-fi network.
Click on Save

Take care

Re: Primary Wi-Fi is disabled but devices are connecting

Vanadiel — Wed, 04 Sep 2024 13:25:36 GMT

The second 5 Ghz band is for TV devices and cannot be disabled. It's always on, even if you shut off the whole home WiFi completely.

It's technically speaking not a regular WiFi channel and cannot be used to connect regular devices. Only the TV boxes can connect to it.

Re: Primary Wi-Fi is disabled but devices are connecting

schultzter — Wed, 04 Sep 2024 21:36:14 GMT

Also, here can see that I don't detect the HH3k's SSID's on my phone so I assume that means they are turned off and not broadcasting. The SSID would be Bell834 if it was turned on - but it's turned off.

So I still wonder how are devices connecting to a Wi-Fi this turned off?

Re: Primary Wi-Fi is disabled but devices are connecting

Vanadiel — Wed, 04 Sep 2024 21:40:37 GMT

Click on the advanced sign in that picture.

Re: Primary Wi-Fi is disabled but devices are connecting

schultzter — Wed, 04 Sep 2024 21:46:50 GMT

Ok, done that. How does that explain the two devices connecting a Wi-Fi that's turned off?!

Re: Primary Wi-Fi is disabled but devices are connecting

Vanadiel — Thu, 05 Nov 2026 15:17:28 GMT

if I remember correctly they are not actually connected. Hence why the WiFi signal strength is showing 0 bars.

The information should also be greyed out.

You can test this by turning it back on and connecting the same device. It should show a signal strength indication and it should not be greyed out anymore.

Can I turn off Wi-Fi broadcasting?

DixonYamada — Mon, 18 Nov 2024 19:25:10 GMT

How do I stopbroadcasting my wifi name or turn it off entirely and only use a Lan cae on my modem