topic Re: Landlines aren't working after updating to Fibre Optics last week in Home phone

Landlines aren't working after updating to Fibre Optics last week

Char53 — Sun, 19 Jul 2026 14:32:32 GMT

My landline phones in the basement arent working after updating to Fibre Optics last week

Re: Landlines aren't working after updating to Fibre Optics last week

WelshTerrier — Sun, 19 Jul 2026 14:57:30 GMT

Good Day & Welcome.

Thank you for posting your question.

Are any of your phones working in your home? Are you able to receive & place outgoing calls on other devices? Are you using cordless phones & corded phones that plug in to jacks?

For all of the phones to work, the "telephone line" for all of the "phone jacks" must connect to the back of the modem.

In order to accurately answer your question, I would need for you to provide us with some specific information.

The wiring for all of the jacks for all of your phones must end up going to the modem, one way or the other. This can be completed very easily or with a lot of difficulty. This can be achieved by redirecting your existing wiring that is running throughout your home. The phones should be able to stay where they are.

If your basement phones rely on being plugged into wall jacks, those jacks must be properly "back-fed" into your modem's phone port, or the wiring near your electrical panel must be manually connected by a technician.

An onsite tech visit may be required. A Bell tech is best qualified to answer this question.

For further assistance, you should contact Bell Home phone Tech support at: 1 866 310-BELL (2355) or dial #611 from any Bell mobile device.

Let us know if we can be of further assistance.

Take care.

Re: Landlines aren't working after updating to Fibre Optics last week

Ancient User — Sun, 26 Jul 2026 17:36:41 GMT

I have the identical problem. My single phone on the landline suddenly stopped working. The wall jack is back-fed into the modem. The phone will work if plugged directly into the modem but not when it is plugged into the wall-jack. It beeps rapidly with no dial tone. There have been no changes at my end.

Re: Landlines aren't working after updating to Fibre Optics last week

WelshTerrier — Sun, 26 Jul 2026 22:25:52 GMT

Good Day & welcome.

Thank you for posting your question.

if your home works when it it is plugged directly in to the phone port on the back of your modem, then the cause of the problem will have to do with either the wiring, phone jack or portable phone / base unit.

You mentioned that your phone is beeping. Have you checked that the battery is fully charged and the base unit is plugged in to the telephone jack and source of power?

Can you try plugging in a different phone in to this same jack to see if this makes a difference?

An onsite tech visit may be required. A Bell tech is best qualified to answer this question.

For further assistance, you should contact Bell Home phone Tech support at: 1 866 310-BELL (2355) or dial #611 from any Bell mobile device.

Let us know if we can be of further assistance.

Take care.