topic Re: Receiver 9242 HDMI + remote in TV & Streaming

Receiver 9242 HDMI + remote

lanopie — Mon, 15 Apr 2024 01:14:55 GMT

On a 9242, is it possible to switch the HDMI part of the receiver (1) to be controlled by a UHF remote instead of the IR remote?

My problem is my receiver is in the basement and my TV is on the first floor. With a 9241 receiver, the HDMI is controlled by a UHF remote.

The UHF remote controls the TV2 part of the receiver I would like to reverse it. Is it possible?

Thanks!

Re: Receiver 9242 HDMI + remote

WelshTerrier — Mon, 15 Apr 2024 09:06:05 GMT

Good Day.

It is not possible to make this change. It is pre-configure by the manufacturer to operate this way.

Take care.

Re: Receiver 9242 HDMI + remote

lanopie — Mon, 15 Apr 2024 14:05:02 GMT

Thanks for the reply. I did notice that if you change the Mode to a single receiver, that works. In my case I don't need to control the second receiver.

Re: Receiver 9242 HDMI + remote

WelshTerrier — Mon, 15 Apr 2024 14:26:58 GMT

Thank you for sharing this with us.

That will work correct as long as you have only one receiver.

https://support.bell.ca/tv/receivers/what_are_the_single_and_dual_modes_on_my_bell_satellite_tv_receiver_and_how_do_i_use_them?

Take care.