topic Re: Fibe Remote burning through batteries approx every 2-3 days in TV & Streaming

Batteries depleting in remote after two weeks, three weeks the most

ME5 — Sun, 05 Jan 2025 18:10:33 GMT

I have a Bluetooth slim remote that i barely use, yet the battery is depleted in 2 to 3 weeks the most.

can anyone tell if i need to get a replacement.

Re: Bluetooth slim remote batteries depleting after two weeks, three weeks the most

WelshTerrier — Tue, 09 Jan 2024 17:02:16 GMT

The batteries in the Bluetooth remote should last for a considerable period of time. I have the same remote & it is used quite frequently. The batteries are well over a year old. I can offer up the following suggestions:

How old is your remote? Is it in good working order?
Any damage on it? Do the buttons stick?
Have you checked the the battery area for leakage? (white powder at either end of battery contacts.
Have you wiped down the the remote used a que tip with alcohol along the buttons & battery area?
Are you using a quality alkaline battery? E.g. Duracell, etc.
When not in use, where is it stored & where do you find it? Seat cushions, under pillows, blankets, pant leg, etc.

When not in use, batteries will deplete if buttons are pushed or stuck on the remote.

If after reviewing all of the above & everything appears copacetic, then I would order a replacement remote from Bell. The Bluetooth Slim remote is $30.00 +HST

You can order this remote by logging in to MyBell.

Here is a link to the Bell Fibe TV remote control web page.

Remotes | Fibe TV | Bell Canada

Thank you for reaching out to the Bell Community Forum.

Take care.

Re: Bluetooth slim remote batteries depleting after two weeks, three weeks the most

Wakka197 — Tue, 09 Jan 2024 21:02:35 GMT

That’s awsome to know .

Re: Bluetooth slim remote batteries depleting after two weeks, three weeks the most

dabindigo — Fri, 20 Sep 2024 14:41:01 GMT

My Fibe Remote is burning through batteries approx every 2-3 days. Should I just order a new remote. Unfortunately they charge $30 for a new one and I'm not sure which one (of 3 options) I have. Thx

Re: Fibe Remote burning through batteries approx every 2-3 days

BellNick — Fri, 20 Sep 2024 14:57:58 GMT

Hi there @dabindigo
Thank you for your post and welcome to the Community.
Are you able to share which receiver model you have?
Do you know roughly how long have you had this remote?
Do you have more than one receiver / remotes and if so, are they all doing this or just a specific one?
Looking forward to hearing back.

Re: Fibe Remote burning through batteries approx every 2-3 days

dabindigo — Fri, 20 Sep 2024 15:56:56 GMT

I don't know what the model is as I can't find a model number/name on the remote. Receiver model is: VIP7802. Remote is the slimline with Google assist that comes bundled with Fibe. I have 3 remotes and have had for about 4-5 months. Only this one remote has a problem. The other two are working fine.

Re: Fibe Remote burning through batteries approx every 2-3 days

BellNick — Fri, 20 Sep 2024 16:20:47 GMT

Hi there @dabindigo
Thanks for the information. The Voice remote is the remote that is for the VIP7802. Please note all remotes have a 1 year warranty. If your remote is less than a year old you will not need to purchase one for $30.00, as a replacement remote would be free. We'd recommend checking out our support article Bell hardware warranty informationfor further information.
If you have any further questions, please do not hesitate to contact the Community.

Re: Fibe Remote burning through batteries approx every 2-3 days

dabindigo — Fri, 20 Sep 2024 18:27:04 GMT

Great. Thanks for your assistance.

Batteries depleting in remote after two weeks, three weeks the most

Shep-Satellite-User — Sun, 05 Jan 2025 18:11:22 GMT

I have several 6.3 IR/UHF remotes for a 9400 PVR. Batteries die on two remotes even if not being used. Why?

Re: Batteries depleting in remote after two weeks, three weeks the most

WelshTerrier — Sun, 05 Jan 2025 19:13:52 GMT

Good Day.

There are any number of factors that affect the drainage of a remote control. How old are the remotes controls?

Check the battery storage area ensuring it is clean & there is no dried out battery leakage.
Cup your hand over the led light on the remote control remote & see if the led lamp is dimly lit.
Any damage on it? Do the buttons stick?
Was there any liquid spillage on or near the remote control? This can short out the contacts & pad in the remote control.
Have you tried to wipe down the remote using a que tip with alcohol along the buttons & battery area?
Are you using recently purchased quality alkaline battery? E.g. Duracell, etc.
There could be a short between two solder points inside of the remote control.
When not in use, where are the remotes stored & where do you usually find the remotes? Seat cushions, under pillows, blankets, pant leg, etc.

When not in use, batteries will deplete if buttons are pushed or stuck on the remote.

If you are unable to determine the source of the problem, you can order a replacement remote control for the 9400 PVR online at the following link:

Bell Satellite TV - Equipment - Remotes

Remotes - Satellite TV | Bell Canada

Please refer to the 9400 PVR model number on your device to select the compatible remote control that meets your needs. A refurbished remote control for your device is: @$30.00 + Tax. You can also contact Bell Satellite TV to order a replacement remote control: 1 888 759-3474

Take care.

Re: Batteries depleting in remote after two weeks, three weeks the most

toine — Sun, 16 Mar 2025 00:32:28 GMT

I started having this issue following the last update that was pushed by Bell. I just replaced the original batteries that came with the remote and now I have chewed 3 sets of Duracell batteries in about 2 weeks. I have a battery tester so I know they went into the remote at full power and were drained when removed. The remote is clean, with no buttons stuck. The battery area is clean with no obvious dirt or damage. Could something in the update be the cause?

Re: Batteries depleting in remote after two weeks, three weeks the most

BellPatricia — Mon, 17 Mar 2025 14:06:07 GMT

Hey there @toine

Thanks for reaching out to the Bell community.

Software/firmware updates generally don't directly impact battery life in such a dramatic way.

How old is your remote, and do you have other remotes with a similar issue? When you are not using the remote where is it stored (i.e. on the coffee table, between the couch cushions)?

If you've checked off all the suggestions in the helpful reply, as noted by @WelshTerrier, it may be time for a replacement remote.

Keep the Community posted and let us know how everything turns out.

@BellPatricia

Re: Batteries depleting in remote after two weeks, three weeks the most

Kristen F — Mon, 27 Apr 2026 22:13:10 GMT

I am having the same issue, even after purchasing a new remote - works great with the batteries provided by Bell, no go with any other types of batteries- seems like a cash grab to require purchase of new remotes every 12 months or so, usually just after the warranty period ends.

Re: Batteries depleting in remote after two weeks, three weeks the most

WelshTerrier — Tue, 28 Apr 2026 09:28:16 GMT

Good Day & Welcome

Which remote control are you experiencing an issue with? E.g. Bluetooth slim remote, Voice Remote with Google Assistant, etc.

Depending on the model of your remote control, you may be able to check the battery level by selecting Menu on your remote. Select > Settings > Remote control

The batteries in a Bluetooth remote should generally last for a considerable period of time. Battery life is dependent upon the usage of the remote & the quality of the batteries that you are using. For example, the batteries in my 4 Bell remotes are well over a year old.

I can offer up to you the following suggestions:

How old is your remote? Is it in good working order?
Any damage on it? Do the buttons stick?
Have you checked the battery area for leakage? (White powder at either end of battery contacts.
Have you wiped down the remote using a Q-tip with alcohol along the buttons & battery area?
Are you using a quality alkaline battery? E.g. Duracell, etc.
When not in use, where is it stored & where do you find it? Seat cushions, under pillows, blankets, pant leg, etc.

When not in use, batteries will deplete if buttons are pushed or stuck on the remote.

If after reviewing all of the above & everything appears copacetic, then I would order a replacement remote from Bell. E.g. A Bluetooth Slim remote is $30.00 +HST.

If need be, you can order a remote by logging in to MyBell.

Here is a link to the Bell Fibe TV remote control web page.

Remotes | Fibe TV | Bell Canada

Thank you for reaching out to the Bell Community Forum.

Take care.