https://forum.bell.ca/t5/tv-streaming/can-i-bypass-the-switch-set-up-and-connect-lnb-cables-for/m-p/95248#M24669 <P>Good Day.</P><P>Yes, you can do so. It is unclear to me why you would want to do this. You can bypass the switch setup.</P><P>In any event you will still need to run the<SPAN>&nbsp;"Check Switch". It is a diagnostic function that&nbsp;allows your receiver to test the connection to the satellite dish and identify its signal path.&nbsp;</SPAN><SPAN>When you run "Check Switch," the receiver sends a signal to the dish's LNB and confirms the correct configuration for receiving programming, which helps resolve signal-related issues and ensures your channels are working correctly.</SPAN></P><UL><LI><SPAN>The Check Switch test runs a system test on your satellite receiver.</SPAN></LI><LI><SPAN>It helps to diagnose problems with your satellite system.</SPAN></LI><LI><SPAN>It verifies the signal and can help identify if there's an issue with the dish alignment or the receiver.</SPAN></LI></UL><P><SPAN>I will leave this for you to decide.</SPAN></P><P><SPAN>Take care.</SPAN></P> Tue, 16 Sep 2025 20:16:16 GMT WelshTerrier 2025-09-16T20:16:16Z https://forum.bell.ca/t5/tv-streaming/can-i-bypass-the-switch-set-up-and-connect-lnb-cables-for/m-p/95245#M24668 <P>Now that Bell has all Satellite channels to 91 and shut down 82 . Is it possible to bypass the switch set up and connect the lnb cables for 91 directly to my Pvr ( 9242 )&nbsp;</P> Tue, 16 Sep 2025 19:13:53 GMT https://forum.bell.ca/t5/tv-streaming/can-i-bypass-the-switch-set-up-and-connect-lnb-cables-for/m-p/95245#M24668 Hwy102 2025-09-16T19:13:53Z https://forum.bell.ca/t5/tv-streaming/can-i-bypass-the-switch-set-up-and-connect-lnb-cables-for/m-p/95248#M24669 <P>Good Day.</P><P>Yes, you can do so. It is unclear to me why you would want to do this. You can bypass the switch setup.</P><P>In any event you will still need to run the<SPAN>&nbsp;"Check Switch". It is a diagnostic function that&nbsp;allows your receiver to test the connection to the satellite dish and identify its signal path.&nbsp;</SPAN><SPAN>When you run "Check Switch," the receiver sends a signal to the dish's LNB and confirms the correct configuration for receiving programming, which helps resolve signal-related issues and ensures your channels are working correctly.</SPAN></P><UL><LI><SPAN>The Check Switch test runs a system test on your satellite receiver.</SPAN></LI><LI><SPAN>It helps to diagnose problems with your satellite system.</SPAN></LI><LI><SPAN>It verifies the signal and can help identify if there's an issue with the dish alignment or the receiver.</SPAN></LI></UL><P><SPAN>I will leave this for you to decide.</SPAN></P><P><SPAN>Take care.</SPAN></P> Tue, 16 Sep 2025 20:16:16 GMT https://forum.bell.ca/t5/tv-streaming/can-i-bypass-the-switch-set-up-and-connect-lnb-cables-for/m-p/95248#M24669 WelshTerrier 2025-09-16T20:16:16Z