topic Re: Control 5.1 volume on amp with bell tv slim remote in TV & Streaming

Control 5.1 volume on amp with bell tv slim remote

FMenard6 — Tue, 08 Nov 2022 03:29:32 GMT

Hi all, this might be a long shot question… I got myself an older 5.1 amp, a denon AVR-1912.

Im going cat cable into setup box -> hdmi into amp -> hdmi into TV, how can I control the amp volume with the slim Bell remote? Doing a remote search doesnt work. If I use stereo output inside Bell TV it will work (Bell volume 0-25), but that doesnt control anythin if its in 5.1, how so?

Thanks for any help!

Re: Control 5.1 volume on amp with bell tv slim remote

BellNick — Thu, 10 Nov 2022 12:59:16 GMT

Hi there @FMenard6,

Thank you for your post and welcome to the Community.

Could you please share some information so we can better assist?

Which television receiver model do you have?
Does stereo mode on your amp work?

Looking forward to hearing back.

Re: Control 5.1 volume on amp with bell tv slim remote

Wakka197 — Sun, 03 Mar 2024 19:25:13 GMT

I don’t know if you can use the slim remote for the Amp when the guy came to install my TV he only got it to work on the TV not my amp.

Bell fibe remote not connecting to TV and Amp

Ram101 — Sun, 03 Mar 2024 19:21:36 GMT

The Bell Fibe remote only connects to one device. How can I get it to control (turn off and on) both devices. I have a Samsung TV and Denon amplifier.

Re: Control 5.1 volume on amp with bell tv slim remote

dks — Tue, 05 Mar 2024 18:15:30 GMT

Simple answer is that you can’t. I have two Sony TV’s with Sony amps. The Bell satellite receiver remote will turn the Sony TV’s on and off and the Sony amp remote turns the amp on and off. I went to a Logitech Harmony remote which turns the amp and the TV on and off but is a pain to set up and has some strange quirks.

How to pair slim Fibe remote to old NAD receiver with no bluetooth for volume control

Belini — Thu, 14 Mar 2024 14:37:53 GMT

I have switched from Ignite to Fibe TV. My Ignite remote paired with my non-bluetooth NAD receiver for volume control. It had a screen where I could select a specific company (NAD) and then paired the device. Fibe TV just searches for Blue Tooth devices. Is there a way to pair the sound receiver to the Fibe remote?

Re: How to pair slim Fibe remote to old NAD receiver with no bluetooth for volume control

BrianH — Mon, 10 Feb 2025 18:04:46 GMT

Same here Ignite to Fiber... well that's annoying... a step backwards if you ask me. Probably means I need a new remote control with blue tooth??

Control 5.1 volume on amp with bell tv slim remote

Rick Legault — Wed, 12 Mar 2025 17:57:10 GMT

How do I get my bell VIP2262 box and Bluetooth remote control my new Samsung Soundbar HW-S60D