topic Re: Error 101 "something went wrong" in TV & Streaming

Error 101 "something went wrong"

NewUser — Thu, 16 May 2024 12:24:19 GMT

A few nights ago, watching any channel would result in a blue screen coming up saying that "Oops something went wrong", with an Error 101.

After rebooting things a few times, and trying both WiFi and Ethernet, the issue was still not resolved. I called the number on the screen, and the tech I reached had me reboot things again. She hinted she was doing something at her end, but was quite vague. After the third sequence of rebooting the modem, and the PVR, it started working. She couldn't give me a good explanation just "maybe there was an update or a power outage recently". (We also had a 7 second delay on the phone line, which she acknowledged was her end, and made communication very difficult).

I don't know if there's been a software update on the PVR, but there certainly has not been a power outage. My Internet is 1Gb/s, and it runs very well, testing at a consistent 936Mb/s down, and about 700Mb/s up, on a wired connection. I should also note that watching Fibe on my other devices, including Fire TV on the same TV works just fine. It's just the PVR.

The tech didn't really understand what it meant to be hard-wired with Ethernet. She had me try with WiFi also (same issue). She had to put me on hold to ask someone about how to deal with me being hard-wired, so I'm not confident she fully understood, and maybe didn't actually do anything at her end.

The real issue now is that it wasn't a one-time issue. It just it did it again today. Any channel would work for about 5 seconds before the blue screen would come up. Rebooting the PVR did not solve it. Although the Internet was running just fine, (as was Fibe on my other devices), I rebooted the modem, then the PVR again. It's working again now - it's been 15 minutes without failing, but I'm not sure for how long it will last before it happens again.

Again, my Internet connectivity is rock solid and fast. Fibe works well on apps, and on Fire TV. It's just when using the PVR.

Is anyone else experiencing this issue? Was there a recent update that may be buggy?

Re: Error 101 "something went wrong" (Fibe TV Whole Home PVR)

BellPatricia — Fri, 26 Apr 2024 17:12:58 GMT

Hi @NewUser

Thanks very much for your post.

Sorry that you are having trouble with your Fibe TV service.

As you've done testing while wired, and on Wi-Fi it sounds like there could be a network issue.

Check out this How To: Fibe TV not working? Try these quick fixes It includes some troubleshooting tips, and if those don't work there is also information on using our Virtual Repair tool . We recommend using the Virtual repair tool right when the issue occurs.

The Virtual repair tool will:

Look for service outages in your area
Check the equipment outside your home
Reboot all your hardware
Optimize the settings for your service

If it can’t solve the problem, the tool will even help you book a technician appointment.

Let the Community know how everything goes.

- Patricia

TV signal keeps dropping FibeTV HH4000

jzanin — Wed, 27 Apr 2022 00:46:44 GMT

Warning - very disgruntled Bell customer here. I jumped ship from my previous cable provider (of several decades) and joined Bell because of their sweet fiber promos last November. Honestly it has been a gong show from the start. I am now on my 4th HH4000 modem, and my 2nd set-top box, having endured at least a half-dozen technician visits in the 5 short months I have been a customer. The recurring issue is that my TV service keeps dropping. It is almost like clockwork - every 4-5 days I will turn on my TV. Everything will be fine and then after 10 seconds or so the image will freeze, then I will get a blue screen and it will say "something went wrong" blah blah blah Error Code 101. If I change the channel, the next channel will be fine for about 10 seconds, and then exact same thing happens... Internet service is fine (> 1 Gbps) and home phone is fine. I know that I can resolve the issue by rebooting the HH4000, but why should I have to???? Rebooting the set-top box does NOT fix the issue.

It happened again just now. Rather than call Bell and have them send yet ANOTHER tech, I tried the virtual repair service, while I was on hold with Rogers asking about reactivating my cable service.

The Virtual repair worked (because it reboots all the boxes as part of its repair sequence), BUT it also said that as part of the "Outside Hardware Check" that "we made a change to improve your service". Nowhere in the summary does it give details around what change or changes it made, so I have no idea if this is just a gimmick, or if there was truly a change that needed to be made (that 5 unique Bell technicians all overlooked).

Anyone have any advice? I love having 1 Gbps service, but I value consistent TV service as well. Having to reboot my homehub every few days is ABSOLUTELY a deal breaker.

If anyone from Bell is reading, the clock is ticking. Either provide a permanent fix, or I am going back to Rogers, and I will most certainly NOT be paying you any sort if early cancelation fees...

It is your choice Bell... fix the problem properly, or lose my business. I am tired of your excuses, and I am tired of arguing.

You know how to reach me.

Sincerely,

John in London Ontario

Re: TV signal keeps dropping FibeTV HH4000

AlexS — Wed, 27 Apr 2022 08:49:42 GMT

That's a lot of visits. Did they replace the modem or only the dvr for just once?

Re: TV signal keeps dropping FibeTV HH4000

jzanin — Tue, 17 May 2022 15:03:32 GMT

UPDATE - PLEASE READ!

Based on a suggestion from a Bell tech who called me to discuss the issue, I moved my home-phone wireless base station, which had previously been located mere inches away from the Bell PVR set-top box. It has been almost two weeks now, and the problem HAS NOT RETURNED!

I hope that I am not jinxing the situation, but it appears that the issue has been resolved. My set-top box is connected to the HomeHub wia wireless connection, and cordless home phones have been know to interfere with wifi signals, so it all makes sense. I just wish that someone would have noticed this BEFORE they swapped out my PVR as part of the troubleshooting, and I lost three month's worth of recordings!

Re: Error 101 "something went wrong" (Fibe TV Whole Home PVR)

NewUser — Fri, 29 Jul 2022 13:06:40 GMT

Since the last firmware update, this seems to be happening seldom. Fingers crossed.

Re: Error 101 "something went wrong" (Fibe TV Whole Home PVR)

somethingwentwrong — Wed, 24 Aug 2022 22:45:55 GMT

Exactly the same thing keeps happening to me. It is something relatively new - started occurring 2 - 3 months ago. I My 4K PVR receiver is also hard wired to the modem (Home Hub 3000). The problem comes and goes in random batches.

Re: Error 101 "something went wrong" (Fibe TV Whole Home PVR)

BellPatricia — Fri, 26 Aug 2022 19:07:33 GMT

Hey there @somethingwentwrong. Thanks for your post 🙂

Just checking in to see if you have been able to run the Virtual Repair toolwhen this issue occurs?

Keep the Community posted.

- Patricia

Re: Error 101 "something went wrong" (Fibe TV Whole Home PVR)

Mike_in_TO — Fri, 26 Aug 2022 20:01:02 GMT

My Error 101 finally got fixed by a Bell technician. He was here for 5 hours sequentially replacing and then testing every piece of equipment: 2 receivers, the VAP3400, a piece inside the 3000 modem, then the whole modem and finally he replaced the Hub 3000 with a 4000. It’s been fine ever since. But I don’t understand why the old equipment had been working for 4 years and then suddenly it all needed replacement.

Re: Error 101 "something went wrong" (Fibe TV Whole Home PVR)

AlexS — Sun, 25 Sep 2022 14:41:56 GMT

Just like phones and computers, u need to replace them every few yrs bc they will get slower and slower as time goes by, even if u r actually doing all the soft and hardware maintenance all along the way.

Re: Error 101 "something went wrong" (Fibe TV Whole Home PVR)

somethingwentwrong — Fri, 14 Oct 2022 14:23:11 GMT

Several weeks ago I had a technician scheduled to, what I had hoped for, replace the Hub3000. The night before I got an email from Bell saying that they had fixed the problem at their end and that I could call off the technician. I did not do it. He came in and, to play it safe, he replaced the Hub. The new hub was broken, so he switched back to the old one and, after apologizing profusely, left. I felt bad for the poor guy, however, I was left with the status quo. Miraculously, I have had no "oops" incidents ever since. Whatever they did at "their end" worked. Of course I have no idea what they did, if anything. Perhaps the fact that I had to reset the Hub was the fix. Fingers crossed.

Fibe TV error 101

Brother — Sun, 23 Oct 2022 16:04:10 GMT

Installed the fibe service this past thursday, have 4 tvs, within a couple of hours, got the above error, unplugged the modem as per instructions several times as doors kept popping up, called tech support last night and the technician reset it. This morning tv played for couple hours and again same error. What’s up with this? Do I need wi-if pods? I have a printer in the same room as the modem, it tells me I’m offline when I have the correct wi-fi.

what to do I do?

thank you

Re: Fibe TV error 101

BellPatricia — Tue, 25 Oct 2022 18:29:30 GMT

Hey there @Brother. Thank you for reaching out to the Bell Community 🙂

What type of TV receiver are you using and are you getting error 101 on all of your TV receivers, or just the one?

Is there any third-party equipment connected between the receiver and your TV?

If the receiver is connected wirelessly, are you able to test a direct Ethernet connection from the receiver to the modem and let us know if that makes any difference?

Looking forward to hearing back from you.

- Patricia

Re: Fibe TV error 101

Brother — Wed, 26 Oct 2022 16:02:03 GMT

I have 1 Panasonic, 2 Samsung & 1 Toshiba.

Getting on at least 3 TV. Received the error last night after 2.5 hrs of play and again this morning after 1.5 hrs of play. Played 2.5 hrs of PVR last night plus 45 minutes of regular play, I don’t know if PVR for longer will give the error.

Tried to use Virtual Tool Repair but it is temporarily unavailable.

Why is it that after you get the error 101, shut it off (without rebooting, which doesn’t help) and return after a couple of hours. It’s playing as I’m doing this very moment at 11:37 am.

Brother

Re: Fibe TV error 101

BellPatricia — Wed, 26 Oct 2022 18:49:04 GMT

Hey @Brother, thanks for your reply. Error 101 normally means there is a signal issue.

Can you please share which TV receiver/modem you are using? Also, have you been able to try a direct connection via Ethernet to see if it makes a difference?

If you continue to experience any trouble after trying an Ethernet connection we recommend performing a factory reset of your modem.

Keep the Community posted, we will be happy to help if you need anything else.

- Patricia

Re: Error 101 "something went wrong" (Fibe TV Whole Home PVR)

ANTHONY — Mon, 30 Jan 2023 15:41:53 GMT

I have had the same problem.....it was finally resolved after 2nd home visit....

It seems like the modem was too close to the tv box....after moving the box (3 feet apart) the connection was established and was getting the service and has been working for the last 24hours....the connection was and is very strong...try this...hopes it helps....

Re: Error 101 "something went wrong"

Claudec110 — Wed, 07 Jan 2026 17:16:28 GMT

Usually a change of channel solves the problem for me.

Re: Error 101 "something went wrong"

KeK123 — Wed, 07 Jan 2026 17:52:35 GMT

Getting the 7802 receiver resolved our issue too. Maybe twice in the last four weeks a screen issue occurred, but on the top right corner is a message that says something like “not connected to internet - reboot-“ and I pressed the message and issue was immediately resolved.

Re: Error 101 "something went wrong" (Fibe TV Whole Home PVR)

FakeNameBoots — Fri, 29 Dec 2023 23:24:22 GMT

I’m on day 4 since changing the pod output to 1080 and so far so good. I’ve got a 4K TV but with this change I think/hope I’ve fixed my intermittent signal loss.

Error 101 "something went wrong"

Sach — Mon, 03 Jun 2024 12:23:25 GMT

I keep getting error code 101 so when I restart it's stuck on the BELL FIBE Screensaver. I'm getting very frustrating because it's been happening the last 2 days