<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: Why am I getting &amp;quot;Attention 005 Your smart card does not currently have authorization to view or purchase this progr in TV &amp; Streaming</title>
    <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114482#M29706</link>
    <description>&lt;P&gt;Bell replaced all my personal (i.e. I bought them) 3100 receivers with 6500 receivers ($0/month) when the 3100 receivers were no longer supported via satellite... at the time, my 3100 receivers were starting to glitch/freeze up ad when I had called Bell support, I was informed that 3100 receivers were being decommissioned or would no longer access the Bell satellites which I knew nothing about but that's another story. I think this happened at the same time that Bell stopped using one of their satellites (I think they stopped using 82 at the time)... however all of that is another story and is a tangent from my current issue of missing getting the error message with Channel 206.&lt;/P&gt;&lt;P&gt;I've done all the following troubleshooting thinking that one of them might be the issue...&lt;/P&gt;&lt;P&gt;1) As mentioned, I was a Bell satellite subscriber for 20+ years and with my older receivers which were my first receivers when I originally subscribed to Bell Expressvu (I think it was the 3100 and 2700), the 2700 had a card which was visible in the front and the 3100 had a drawer or "door/opening" in the front where you opened it with your finger and then you could pull out the smartcard. With my current 6500 (or more accurately since they belong to Bell, their 6500), there is no smartcard slot visible from the outer case/shell of the receiver. Based on my IT technical experience without having opened up the 6500 (which I wouldn't do since it belongs to Bell and they would likely accuse me of damaging it), the smartcard is integrated as part of the main motherboard of the 6500 either as a "chip" or it is an actual Bell smartcard (similar to what was inserted in my old 3100 or 2700) inside the receiver. The first troubleshooting step that I would normally do is to remove the smartcard, wait about a minute and insert the smartcard back into the receiver. This is NOT possible with the 6500.&lt;/P&gt;&lt;P&gt;2) Since with my older receivers, they used to update the "software version" on the receiver over satellite BUT this only happened when those old receivers were plugged in but powered off with the 6500, they go into a "sleep mode" (or screensaver mode) when the power button is pressed. On that screen, it mentions to press the "select" button on the remote to "wake it up". Since with the newer 6500, mine are set to rarely "go to sleep", I wasn't sure if the software on them was the most recent so I manually put it in this "sleep mode" so the light on the front of the receiver was off but turning on the TV shows that the receiver is in some "sleep mode" with what I term the "screensaver" appears. I left my receivers in this state overnight. When I woke up, the software version did not change.&lt;/P&gt;&lt;P&gt;3) I unplugged the receiver from the electrical outlet and removed the satellite feed on the receiver and waited an hour before reconnecting the satellite feed to the back of the receiver and connecting it to the power outlet. The receiver booted up normally and then downloaded the guide and showed my local CBC (CBC-Montreal-206) as blue/available on the Guide but when I went to this channel either by using the Guide or by keying in 2-0-6 on my Bell remote, I got the 005 error code message mentioned in my original post which started this thread.&lt;/P&gt;&lt;P&gt;4) I then pushed the power button on the front of my receiver and kept my finger on the power button and the receiver powered off but the receiver powers off with the front light still it (television shows that there is no feed/input) and nothing happens until I remove my finger from the power button and then I get the Bell screen on my TV and it then does the Transponder Progress and downloads the guide. At the end of this, I go to my guide and 206 appears there normally BUT when I select it from the guide, I get the same 005 error and it is the same thing when I key in 2,0,6 on my remote.&lt;/P&gt;&lt;P&gt;5) The last thing I did was to go to the Bell website, log in, and then click on the "Reset/Resync satellite channels" (paraphrasing here since I don't remember the exact menu option on my Bell page when I log in BUT when I select this, I get a message indicating that this can only be done 3 times in 30 days BUT I have not done this prior to me noticing this issue on Sunday of this week and I've clicked on this a few times now since I got the 005 message for Channel 206 on Sunday and I don't remember what it used to say but it should not give a message about it only being able to do it 3 times in 30 days from what I remember when I did it about a year ago... it used to say something from memory about it sending the programming signal which should happen in the next few minutes but can take a few hours and it is important to keep the receiver plugged into both the satellite feed and plugged into an electrical cable.&lt;/P&gt;&lt;P&gt;206 is a channel that I've had for over 20+ years and I didn't any changes to my programming since I originally signed up with Bell Expressvu and I'm now under what they call "Grandfathered plan/package". I know you mentioned not to mention about the FibeTV app but with the FibeTV app on my Android tablet, I have the ability to record 206 so if it wasn't part of my subscription package like some of the ethnicity channels in the 700 range, I would not be able to record it.&lt;/P&gt;&lt;P&gt;I finally managed to convince Bell support to just send the resync command and this fixed my issue.&lt;/P&gt;&lt;P&gt;Bell phone support is very bad especially since based on the times I call them, I assume it has been outsourced to the Phillipines where they don't know anything about Bell satellite and gets annoying when they tell me to do some things which are not possible with my receiver (like "remove my smartcard for a few seconds and insert it back in") or don't know what CBC is...&lt;/P&gt;&lt;P&gt;It is like telling people to call iPhone support and when calling, you get someone who has never touched an iPhone before and have only used Android and tells you to do things on your iPhone screen when they've never seen an iPhone screen and what they are telling you doesn't match what you have in front.&lt;/P&gt;&lt;P&gt;Very frustrating...&lt;/P&gt;</description>
    <pubDate>Wed, 21 Oct 2026 03:27:45 GMT</pubDate>
    <dc:creator>lmcjipo</dc:creator>
    <dc:date>2026-10-21T03:27:45Z</dc:date>
    <item>
      <title>Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this program" ?</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114314#M29639</link>
      <description>&lt;P&gt;I tried to watch 206 (CBC-Montreal) on my satellite receiver just a few minutes ago to try to catch the news and the receiver shows an "Attention 005" message (Your smart card does not currently have authorization to view or purchase this program. Please wait or channel up or down. Troubleshooting help? Visit: support.bell.ca/TV)&lt;/P&gt;
&lt;P&gt;I waited a few minutes and then used the remote up and down but the same message appears when returning to 206.&lt;/P&gt;
&lt;P&gt;206 to my knowledge is included in all satellite subscriptions and is a "base" service since I've had it "forever" as part of my satellite package.&lt;/P&gt;
&lt;P&gt;I tried to resynchronize on Bell's website but got a warning about syncing can only happen 3 times in 30 days (and I don't think I've done this at all in the last 30 days)&lt;/P&gt;
&lt;P&gt;When I launch the FibeTV app on my Android tablet, I can see channel 206 in my guide but this is one of those channels that I can't watch live on my tablet and I can only record it to watch later and I'm shown a message that this channel must be watched/viewed on my receiver if I want to watch it live.&lt;/P&gt;
&lt;P&gt;I tried a different CBC local station (208) on my satellite receiver which is Ottawa and it appears fine but obviously this doesn't help me because I'm trying to watch the local news.&lt;/P&gt;
&lt;P&gt;Any ideas or is this happening with someone else who is on Bell satellite?&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Mon, 19 Oct 2026 13:02:39 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114314#M29639</guid>
      <dc:creator>lmcjipo</dc:creator>
      <dc:date>2026-10-19T13:02:39Z</dc:date>
    </item>
    <item>
      <title>Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this program" ?</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114315#M29643</link>
      <description>&lt;P&gt;Good Day &amp;amp; Welcome.&lt;/P&gt;
&lt;P&gt;Thank you &lt;a href="https://forum.bell.ca/t5/user/viewprofilepage/user-id/516571341"&gt;@lmcjipo&lt;/a&gt;&amp;nbsp;for posting your question.&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;Error 005 – Your smart card does not currently have authorization.&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;Please check to see if this channel is included in your TV package:&amp;nbsp;&lt;A href="https://m.bell.ca/supporttvchannellineupe" target="_self"&gt;Channels included in My TV package&lt;/A&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Have you made any recent changes to your programming?&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;If this channel is included as part of your TV package, please try to restore the channels&lt;/SPAN&gt;&lt;SPAN&gt;&amp;nbsp;by:&lt;/SPAN&gt;&lt;/P&gt;
&lt;UL&gt;
&lt;LI&gt;&lt;STRONG&gt;Synchronize your programming:&lt;/STRONG&gt; &lt;A href="https://m.bell.ca/supportsynchproge" target="_blank" rel="noopener"&gt;Sync your programming online&lt;/A&gt;&lt;SPAN&gt;. Simply follow the onscreen instructions or call:&amp;nbsp;&lt;A href="tel:18663374617" target="_blank" rel="noopener"&gt;1 866 337-4617&lt;/A&gt;&lt;/SPAN&gt;&lt;SPAN&gt;&amp;nbsp;to synchronize your programming by phone 24/7.&lt;/SPAN&gt;&lt;/LI&gt;
&lt;/UL&gt;
&lt;P&gt;&lt;SPAN&gt;If you are unable to synchronize your programming due to your limit being reached, please try to:&lt;/SPAN&gt;&lt;/P&gt;
&lt;UL&gt;
&lt;LI&gt;&lt;STRONG&gt;Reset your receiver:&lt;/STRONG&gt; On most models, simply hold the POWER button on the front of your receiver for 5 to 8 seconds and then allow it to reset the satellite signal.&lt;/LI&gt;
&lt;LI&gt;&lt;STRONG&gt;Refresh the Smartcard:&lt;/STRONG&gt;&amp;nbsp;Pull the plastic cover panel open on the front of your receiver to locate the SmartCard slot.&amp;nbsp;&lt;SPAN class=""&gt;Remove the SmartCard and wait until the System Information Screen appears on your TV.&amp;nbsp;&lt;/SPAN&gt;&lt;SPAN class=""&gt;Re-insert the SmartCard (ensure the barcode is facing down and to the right).&amp;nbsp;&lt;/SPAN&gt;&lt;SPAN class=""&gt;Allow the receiver to re-acquire its satellite signal.&lt;/SPAN&gt;&lt;/LI&gt;
&lt;/UL&gt;
&lt;P&gt;&lt;A href="https://support.bell.ca/tv/channels/i_can_t_access_some_of_the_channels_that_i_ve_subscribed_to?" target="_blank" rel="noopener"&gt;I can't access some of the channels that I've subscribed to : Why am I missing channels?&lt;/A&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;If the problem persists after completing the above, please contact Bell Satellite TV Tech support at:&amp;nbsp;&lt;A href="tel:18887593474" target="_blank" rel="noopener"&gt;1 888 759-3474&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;&lt;STRONG&gt;FYI Only!&lt;/STRONG&gt;&amp;nbsp;The message stating that "&lt;EM&gt;syncing can only happen 3 times in 30 days"&lt;/EM&gt; is a built-in security limit set by Bell Satellite TV.&amp;nbsp;Bell limits self-serve programming "re-hits" (synchronizations) via the MyBell website or app to prevent account misuse, such as unauthorized account sharing across different locations.&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;Take care.&lt;/SPAN&gt;&lt;/P&gt;</description>
      <pubDate>Mon, 19 Oct 2026 13:02:53 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114315#M29643</guid>
      <dc:creator>WelshTerrier</dc:creator>
      <dc:date>2026-10-19T13:02:53Z</dc:date>
    </item>
    <item>
      <title>Re: Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this progr</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114367#M29668</link>
      <description>&lt;P&gt;The channel 206 CBC is a base channel and as mentioned, it shows up on my Fibe TV app AND I can record this channel on my Fibe TV app which if me mentioning that it is a basic/base channel doesn't mean anything, me being able to record it on the Fibe TV app should indicate that I should have it.&lt;/P&gt;
&lt;P&gt;On the Fibe TV app, like all CBC local channels, one can't watch it live from the app probably because Bell owns CTV and CBC is a competitor to CBC. Also as mentioned, my satellite receiver can get 208 which is CBC-Ottawa as well as other CBC local stations but this doesn't help me since while almost all the programs on CBC-Montreal is the same as CBC-Ottawa, the local news is NOT the same.&lt;/P&gt;
&lt;P&gt;Does CBC-Montreal on 206 still exist on satellite?&lt;/P&gt;
&lt;P&gt;I tried calling Bell TV satellite and they were useless. From their accent from the numerous times that I called it has been outsourced offshore to the Philippines. When someone doesn't know what CBC is and the person keeps saying "CVC" and I have to use phonetics to explain it to them "C as in Charlie, B as in Bravo, C as in Charlie" and they still have problems with the words that I used, it is silly. Then they told me that I don't subscribe to CBC-Montreal and I told them that it is included in the general package which all Bell satellite subscribers automatically get in the Eastern Time Zone... just like CBC-Ottawa and CBC-Toronto and because I have time shifting as part of my package, I have CBC local stations in most of the CBC local time zones but this doesn't help me since while 95% of the shows are the same, when it plays the news at 6:00pm local time, it is NOT the same NOR when it plays the news at 11:00pm, it is NOT the same so it isn't like I can just "switch" to CBC-Ottawa for this like I can do for another show.&lt;/P&gt;</description>
      <pubDate>Wed, 21 Oct 2026 13:04:45 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114367#M29668</guid>
      <dc:creator>lmcjipo</dc:creator>
      <dc:date>2026-10-21T13:04:45Z</dc:date>
    </item>
    <item>
      <title>Re: Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this progr</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114369#M29669</link>
      <description>&lt;P&gt;Thanks for your details. First, we are all real, live humans here. We might use a Google search to focus on your question, but I certainly don't use AI. I can only speak for myself.&amp;nbsp;I am also a Bell Satellite TV subscriber and am familiar with how it works, as well as the menus.&amp;nbsp;&lt;/P&gt;&lt;P&gt;Some satellite TV packages do not include all stations across Canada, even CBC channels. I can't see certain CTV channels out west, for example. For a time I could not see certain channels in Southern Ontario! Please press the channel guide button so that it shows all channels in your package. Are 206 and 208 present on your receiver guide as you indicate? If so, I encourage you to record the news you want to watch on the channel of your choice. One of the advantages of recording from Satellite TV is that you can go back to the beginning of the recording a few minutes after it has started and watch from the start. it makes eliminating commercials a lot easier. Please let us know if the suggestions work. If not, help us clarify the key issue.&amp;nbsp;&amp;nbsp;&lt;/P&gt;&lt;P&gt;BTW, Fibe TV channels can be different, so a comparison isn't always possible. And you can't watch a recording until it is finished.&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Mon, 19 Oct 2026 21:23:52 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114369#M29669</guid>
      <dc:creator>dks</dc:creator>
      <dc:date>2026-10-19T21:23:52Z</dc:date>
    </item>
    <item>
      <title>Re: Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this progr</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114372#M29671</link>
      <description>&lt;P&gt;Finally dealing with someone who can actually type/speak for him/herself instead of cutting/pasting some text based on certain keywords in my original post.&lt;/P&gt;&lt;P&gt;Yes, 206 and 208 are both present on my Guide and they are Blue and not Red so technically I should have 206. Not only that but I live in Montreal so it doesn't or wouldn't make sense for me to not have 206 (CBC-Montreal) and I've had this station since I was a Bell satellite customer over 20+ years ago and I only got the 005 message on Sunday when it was working fine on Friday when I was watching the local news on CBC-Montreal (206).&lt;/P&gt;&lt;P&gt;208 works for me and as mentioned or to anyone familiar with CBC local stations as well as most CTV local stations in the same time zone, the programming is 95% the same EXCEPT for local news so me having access to CBC-Ottawa or CBC-Toronto (both of which I have access to) is useless to me since I have no desire to watch the local news for those locations since I live in Montreal and have lived in Montreal since I signed up for Bell Expressvu Satellite over 20+ years ago. I can use CBC-Ottawa (208) or CBC-Toronto (210) to catch any of the other programs which I might want to watch on CBC-Montreal (206) like Dragons Den or Kims Convenience, etc. which are broadcast at the exact same time but local Montreal news is of course not part of it.&lt;/P&gt;&lt;P&gt;On my FibeTV app, CBC stations can't be watched "live" from what I've experienced with any of the local CBC stations probably because Bell owns CTV and CTV is a direct competitor to CBC and if I want to watch something, I have to record it on the FibeTV app and then watch it ~30 minutes or so after the program/episode finishes. I can do this with CBC-Montreal (206) so there is something definitely strange going on since Sunday because if it wasn't part of my subscription/package, I would also not have access to it on the FibeTV app and on my receiver, it would show up as red instead of blue in my channel guide... and I have been watching CBC-Montreal (206) for the local news prior to this past Sunday when this issue started for me.&lt;/P&gt;&lt;P&gt;My issue is also with the receiver which doesn't have an external smartcard so I can't remove it from the receiver (like my old 3100) unless perhaps I unscrew the cover of the receiver to remove it in order to see if there is a removable smartcard but I believe it is integrated into the receiver... on top of that, it isn't my receiver and belongs to Bell (at $0/month rental when they replaced my 3100 for free so I don't think they would like it if I opened it up and likely accuse me of breaking it.&lt;/P&gt;</description>
      <pubDate>Mon, 19 Oct 2026 22:59:11 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114372#M29671</guid>
      <dc:creator>lmcjipo</dc:creator>
      <dc:date>2026-10-19T22:59:11Z</dc:date>
    </item>
    <item>
      <title>Re: Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this progr</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114389#M29681</link>
      <description>&lt;P&gt;Thank you for the clarification. Let's leave fibre out of the conversation for a moment. Have you powered down your receiver (which model of receiver, by the way?)&amp;nbsp; or rebooted it as opposed to a resynch? If you have not, you can hold the power button down for ten seconds, forcing a reboot. Alternatively, you can unplug the receiver, leave it for five minutes, and plug it back in. Often this is enough to restore your channel guide and programming. You can do this without any consequences.&amp;nbsp;&lt;/P&gt;&lt;P&gt;If your receiver is a 9500, the smart card is located on the left side of the receiver in a slot. There is no cover.&amp;nbsp;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Tue, 20 Oct 2026 10:42:31 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114389#M29681</guid>
      <dc:creator>dks</dc:creator>
      <dc:date>2026-10-20T10:42:31Z</dc:date>
    </item>
    <item>
      <title>Re: Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this progr</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114401#M29693</link>
      <description>&lt;P&gt;Good Day&amp;nbsp;&lt;a href="https://forum.bell.ca/t5/user/viewprofilepage/user-id/516571341"&gt;@lmcjipo&lt;/a&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;Thank you for your feedback and gracious reply.&lt;/P&gt;&lt;P&gt;Yes, I am a real person.&amp;nbsp;My apologies for not living up to &amp;amp; meeting your expectations.&lt;/P&gt;&lt;P&gt;What is the model number of your Bell Satellite receiver? You should not try to remove the cover. You will need to contact&amp;nbsp;&lt;SPAN&gt;Bell Satellite TV Tech support at:&amp;nbsp;&lt;/SPAN&gt;&lt;A href="tel:18887593474" target="_blank" rel="noopener nofollow noreferrer"&gt;1 888 759-3474&lt;/A&gt;&lt;/P&gt;&lt;P&gt;I have included the following Bell Satellite Channel Listings for all TV packages. (Keeping in mind that not all channels are included in all packages.)&amp;nbsp;Channels shown with an asterisk,&amp;nbsp;&lt;STRONG&gt;(*)&lt;/STRONG&gt; are only available in select regions. To view the channels that are available in your region, please go to this website:&amp;nbsp;&lt;A style="background-color: #ffffff;" href="https://channel.bell.ca/en/" target="_blank" rel="noopener"&gt;Bell TV Channel&lt;/A&gt; and enter your Postal code.&lt;/P&gt;&lt;P&gt;&lt;A href="https://www.bell.ca/Styles/all_languages/all_regions/pdf/5-Program_Channel_DTH_ON_E.pdf" target="_blank" rel="noopener"&gt;Bell Channel Listing Satellite TV_Channel_DTH_ON_E.pdf&lt;/A&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;If you are on Bell Satellite TV and you are using the Fibe TV App, recordings will remain solely on the device or app they were scheduled on. In order to watch a Satellite TV recording on the Fibe TV app, you must schedule the recording using the Fibe TV app &amp;amp; vice versa when you are using a satellite receiver.&amp;nbsp;&lt;/SPAN&gt;&lt;SPAN&gt;Recordings in progress on the Bell Fibe TV app can only be watched 30 minutes after the program's completion.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;If you are traveling outside of your local viewing area or trying to use the Fibe TV app while connected to a non-Home Wi-Fi network, regional blackouts apply.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;Away from home, on another Internet connection or on Bell Wireless Home Internet (WHI), you cannot watch all of your channels on the Bell Fibe TV app. You can watch select Live TV content, video on demand and recordings.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;T&lt;/SPAN&gt;he following document may assist in answering any further questions you might have.&lt;/P&gt;&lt;P&gt;&lt;A href="https://support.bell.ca/tv/channels/what-is-the-fibetv-app-and-how-do-i-use-it" target="_blank" rel="noopener noreferrer"&gt;What is Fibe TV app and how do I use it?&lt;/A&gt;&lt;/P&gt;&lt;P&gt;Let us know if we can be of further assistance to you.&lt;/P&gt;&lt;P&gt;Take care.&lt;/P&gt;</description>
      <pubDate>Tue, 20 Oct 2026 12:13:28 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114401#M29693</guid>
      <dc:creator>WelshTerrier</dc:creator>
      <dc:date>2026-10-20T12:13:28Z</dc:date>
    </item>
    <item>
      <title>Re: Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this progr</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114409#M29695</link>
      <description>&lt;P&gt;Hi&amp;nbsp;&lt;a href="https://forum.bell.ca/t5/user/viewprofilepage/user-id/516571341"&gt;@lmcjipo&lt;/a&gt;&amp;nbsp;&lt;BR /&gt;Thank you for your post.&lt;BR /&gt;Additional to what our All Star users have shared, you can find a list of all available channels within your programming by logging into your MyBell account.&lt;/P&gt;
&lt;OL&gt;
&lt;LI&gt;Log in to your&amp;nbsp;&lt;A href="https://identification.bell.ca/u/login/identifier?state=hKFo2SB2cnJrTDJfZjNTZjJTVWlsVGxyeVRWcFJ3ZlBiTHVjX6Fur3VuaXZlcnNhbC1sb2dpbqN0aWTZIHF4RFVrSmFTWEhBdlhncDRWaFBLUFI2VlNVMzBfd0Vao2NpZNkgSnpTblR4ZGt4VlkzZTV2Z1FrRFJtaXgyb3A4SGozRFo&amp;amp;ui_locales=en-CA" target="_blank" rel="noopener"&gt;MyBell&lt;IMG style="display: inline; padding-bottom: 5px;" src="https://stage-forum.bell.ca/html/assets/Accessiblity_Arrow.png?version=preview" border="0" alt="Opens in a new tab or window" /&gt;&lt;/A&gt;account.&lt;/LI&gt;
&lt;LI&gt;Go to your TV overview.&lt;/LI&gt;
&lt;LI&gt;Select "Review channels"&lt;/LI&gt;
&lt;LI&gt;Select "View all my channels"&lt;/LI&gt;
&lt;/OL&gt;
&lt;P&gt;This will show you a list off all the stations included in your programming that you have access to. If you're still having trouble, please share what your programming list indicates and which receiver model you have.&lt;BR /&gt;&lt;BR /&gt;Looking forward to hearing back how that goes.&lt;/P&gt;</description>
      <pubDate>Tue, 20 Oct 2026 13:00:23 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114409#M29695</guid>
      <dc:creator>BellNick</dc:creator>
      <dc:date>2026-10-20T13:00:23Z</dc:date>
    </item>
    <item>
      <title>Re: Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this progr</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114482#M29706</link>
      <description>&lt;P&gt;Bell replaced all my personal (i.e. I bought them) 3100 receivers with 6500 receivers ($0/month) when the 3100 receivers were no longer supported via satellite... at the time, my 3100 receivers were starting to glitch/freeze up ad when I had called Bell support, I was informed that 3100 receivers were being decommissioned or would no longer access the Bell satellites which I knew nothing about but that's another story. I think this happened at the same time that Bell stopped using one of their satellites (I think they stopped using 82 at the time)... however all of that is another story and is a tangent from my current issue of missing getting the error message with Channel 206.&lt;/P&gt;&lt;P&gt;I've done all the following troubleshooting thinking that one of them might be the issue...&lt;/P&gt;&lt;P&gt;1) As mentioned, I was a Bell satellite subscriber for 20+ years and with my older receivers which were my first receivers when I originally subscribed to Bell Expressvu (I think it was the 3100 and 2700), the 2700 had a card which was visible in the front and the 3100 had a drawer or "door/opening" in the front where you opened it with your finger and then you could pull out the smartcard. With my current 6500 (or more accurately since they belong to Bell, their 6500), there is no smartcard slot visible from the outer case/shell of the receiver. Based on my IT technical experience without having opened up the 6500 (which I wouldn't do since it belongs to Bell and they would likely accuse me of damaging it), the smartcard is integrated as part of the main motherboard of the 6500 either as a "chip" or it is an actual Bell smartcard (similar to what was inserted in my old 3100 or 2700) inside the receiver. The first troubleshooting step that I would normally do is to remove the smartcard, wait about a minute and insert the smartcard back into the receiver. This is NOT possible with the 6500.&lt;/P&gt;&lt;P&gt;2) Since with my older receivers, they used to update the "software version" on the receiver over satellite BUT this only happened when those old receivers were plugged in but powered off with the 6500, they go into a "sleep mode" (or screensaver mode) when the power button is pressed. On that screen, it mentions to press the "select" button on the remote to "wake it up". Since with the newer 6500, mine are set to rarely "go to sleep", I wasn't sure if the software on them was the most recent so I manually put it in this "sleep mode" so the light on the front of the receiver was off but turning on the TV shows that the receiver is in some "sleep mode" with what I term the "screensaver" appears. I left my receivers in this state overnight. When I woke up, the software version did not change.&lt;/P&gt;&lt;P&gt;3) I unplugged the receiver from the electrical outlet and removed the satellite feed on the receiver and waited an hour before reconnecting the satellite feed to the back of the receiver and connecting it to the power outlet. The receiver booted up normally and then downloaded the guide and showed my local CBC (CBC-Montreal-206) as blue/available on the Guide but when I went to this channel either by using the Guide or by keying in 2-0-6 on my Bell remote, I got the 005 error code message mentioned in my original post which started this thread.&lt;/P&gt;&lt;P&gt;4) I then pushed the power button on the front of my receiver and kept my finger on the power button and the receiver powered off but the receiver powers off with the front light still it (television shows that there is no feed/input) and nothing happens until I remove my finger from the power button and then I get the Bell screen on my TV and it then does the Transponder Progress and downloads the guide. At the end of this, I go to my guide and 206 appears there normally BUT when I select it from the guide, I get the same 005 error and it is the same thing when I key in 2,0,6 on my remote.&lt;/P&gt;&lt;P&gt;5) The last thing I did was to go to the Bell website, log in, and then click on the "Reset/Resync satellite channels" (paraphrasing here since I don't remember the exact menu option on my Bell page when I log in BUT when I select this, I get a message indicating that this can only be done 3 times in 30 days BUT I have not done this prior to me noticing this issue on Sunday of this week and I've clicked on this a few times now since I got the 005 message for Channel 206 on Sunday and I don't remember what it used to say but it should not give a message about it only being able to do it 3 times in 30 days from what I remember when I did it about a year ago... it used to say something from memory about it sending the programming signal which should happen in the next few minutes but can take a few hours and it is important to keep the receiver plugged into both the satellite feed and plugged into an electrical cable.&lt;/P&gt;&lt;P&gt;206 is a channel that I've had for over 20+ years and I didn't any changes to my programming since I originally signed up with Bell Expressvu and I'm now under what they call "Grandfathered plan/package". I know you mentioned not to mention about the FibeTV app but with the FibeTV app on my Android tablet, I have the ability to record 206 so if it wasn't part of my subscription package like some of the ethnicity channels in the 700 range, I would not be able to record it.&lt;/P&gt;&lt;P&gt;I finally managed to convince Bell support to just send the resync command and this fixed my issue.&lt;/P&gt;&lt;P&gt;Bell phone support is very bad especially since based on the times I call them, I assume it has been outsourced to the Phillipines where they don't know anything about Bell satellite and gets annoying when they tell me to do some things which are not possible with my receiver (like "remove my smartcard for a few seconds and insert it back in") or don't know what CBC is...&lt;/P&gt;&lt;P&gt;It is like telling people to call iPhone support and when calling, you get someone who has never touched an iPhone before and have only used Android and tells you to do things on your iPhone screen when they've never seen an iPhone screen and what they are telling you doesn't match what you have in front.&lt;/P&gt;&lt;P&gt;Very frustrating...&lt;/P&gt;</description>
      <pubDate>Wed, 21 Oct 2026 03:27:45 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114482#M29706</guid>
      <dc:creator>lmcjipo</dc:creator>
      <dc:date>2026-10-21T03:27:45Z</dc:date>
    </item>
    <item>
      <title>Re: Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this progr</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114483#M29707</link>
      <description>&lt;P&gt;As proof of what I'm saying, I mentioned using the FibeTV app on my Android tablet and being able to record CBC-Montreal (206) as proof that I am subscribed to it (along with me having this channel for 20+ years as a Bell Expressvu customer) BUT made no mention of trying to watch the recording on my satellite receiver since I knew that it can only be watched on my Android tablet or another device which has the FibeTV app installed and even though I made NO MENTION of not being able to watch my recording on my satellite receiver (only that I don't have access to view channel 206 on my satellite receiver and get the 005 error about my smartcard not having access to this channel), you tell me that it isn't possible to watch a recording on my Bell satellite receiver which is recorded on the Fibe TV app... which I already knew and didn't make any mention of me trying to do this.&lt;/P&gt;
&lt;P&gt;&amp;nbsp;(i.e. I never mentioned I wanted to watch the recordings on my Bell satellite receiver that I did on my FibeTV app on my Android tablet).&lt;/P&gt;</description>
      <pubDate>Wed, 21 Oct 2026 13:03:40 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114483#M29707</guid>
      <dc:creator>lmcjipo</dc:creator>
      <dc:date>2026-10-21T13:03:40Z</dc:date>
    </item>
    <item>
      <title>Re: Why am I getting "Attention 005 Your smart card does not currently have authorization to view or purchase this progr</title>
      <link>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114486#M29708</link>
      <description>&lt;P&gt;Thank you for the update. Glad to hear you were able to resolve the issue by having Bell resynch the receiver. Going forward, the specific user guide for your 7500 receiver can be found &lt;A href="https://support.bell.ca/tv/products/6500_hd_receiver" target="_self"&gt;here&lt;/A&gt;. If you ever see other error codes on your receiver in the future, a list of those codes with remedies can be found &lt;A href="https://support.bell.ca/tv/receivers/satellite-tv-error-codes-and-troubleshooting?step=1#step1" target="_self"&gt;here&lt;/A&gt;. As a general suggestion, it is helpful to include your receiver model in any query. It really helps in cutting to the core of the issue and removing extraneous solutions.&amp;nbsp;&lt;BR /&gt;&lt;BR /&gt;Thanks again for closing the circle on your specific issue.&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Wed, 21 Oct 2026 09:48:46 GMT</pubDate>
      <guid>https://forum.bell.ca/t5/tv-streaming/why-am-i-getting-quot-attention-005-your-smart-card-does-not/m-p/114486#M29708</guid>
      <dc:creator>dks</dc:creator>
      <dc:date>2026-10-21T09:48:46Z</dc:date>
    </item>
  </channel>
</rss>

