Today my bell internet Fibre 50 FTTH stopped working. My device still showed connection to the Wifi but there was no internet. The modem showed “Error 1201 - Low fibre signal Check fibre connection”. Restarting modem couldn’t fix the problem.
----------------------------------------------------------------------------------------------------------------------------------------------
❗AI Summary:
Users experiencing the "Error 1201 - Low fibre signal
" have identified several potential causes and solutions, primarily pointing to issues with the physical fibre optic connection. The error indicates that the modem is receiving a weak or no light signal through the fibre optic cable, preventing internet access.
Key causes identified by the Bell Community:
Discussions in the Bell Community Forum and other online platforms highlight a range of possible reasons for the error:
- Damaged or disconnected fibre optic cable: This is the most commonly cited cause. The cable could be cut, bent, or damaged externally, such as by landscaping activities. It could also be disconnected at the street-level utility box.
- Faulty or improper connections: The error can occur if the fibre optic cable is not securely connected to the modem or the wall socket. Additionally, the end of the fibre optic cable that plugs into the modem can become dirty and obstruct the signal. In some cases, the connector itself may be faulty.
- External infrastructure or equipment problems: Issues with your Bell modem or other network equipment can lead to this error. Issues may originate from outside the home, such as a problem at a node or demarcation point.
- Incorrect provisioning: A less common but possible cause is a "speed profile" or programming error on the user's account, which would require correction by Bell.
Solutions and troubleshooting steps from the Bell Community:
Forum members and Bell moderators have suggested several troubleshooting steps, ranging from simple checks to requiring technical help:
- Basic troubleshooting: The initial steps include rebooting the modem and ensuring the fibre optic cable is securely connected. However, users often report that a simple reboot does not resolve this specific error.
- Cleaning the fibre connector: Some users have had success by carefully unplugging the fibre optic cable from the modem (holding it by the green housing) and cleaning the tip with a lint-free cloth and rubbing alcohol.
- Use Virtual Repair: The Bell Community Manager recommended using Virtual Repair. This tool can check for local outages, inspect external equipment, reboot your system, and optimize settings. If the issue persists, the tool can help schedule a technician visit.
- Check for outages: It's worth checking if there is a known service outage in your area. How to check for Internet outages in your area or Outage Check.
- Contact Bell Support: Should the above fail to identify or resolve the issue, a technician may be required. Technicians can diagnose and repair issues with the external wiring, connectors, or other infrastructure problems that are beyond the user's control. Should you need to book a technician, reach out using Live Chat or you can dial *611 from any Bell mobile device.
