QOS for video conferencing

Go to helpful replies
z2000
Contributor II

‎07-25-2023 02:16 PM

Hi - doesn't seem like it is available, however without using a second router, how do you set up QOS for video conferencing? 

0 Likes
0 2 1,885
1 helpful reply

Accepted Solutions

Go to helpful replies
ZaneP
Community All-Star
Community All-Star

‎07-25-2023 06:23 PM

QoS is not an available option on Bell's gateway modems. You'll need your own router, and might have to flash it with DD-WRT if your router doesn't have highly configurable QoS built in. Then you'd connect to your Bell modem with whatever is appropriate to where you are in Canada (PPPoE or ADMZ in Ontario & Quebec; DHCP in eastern Canada).

If you haven't configured a router for QoS there are good resources available online.

Cheers,

ZaneP

 

 

 

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

View reply in original post

2 REPLIES 2

Go to helpful replies
ZaneP
Community All-Star
Community All-Star

‎07-25-2023 06:23 PM

QoS is not an available option on Bell's gateway modems. You'll need your own router, and might have to flash it with DD-WRT if your router doesn't have highly configurable QoS built in. Then you'd connect to your Bell modem with whatever is appropriate to where you are in Canada (PPPoE or ADMZ in Ontario & Quebec; DHCP in eastern Canada).

If you haven't configured a router for QoS there are good resources available online.

Cheers,

ZaneP

 

 

 

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

Go to helpful replies
z2000
Contributor II

‎07-26-2023 08:33 AM

Hey, thanks ZaneP, appreciate the info on this.  Will look to do the above