No service only SOS

Ang
Contributor

Had service this morning then went to SOS. 

0 15 34.8K
3 helpful replies

Accepted Solutions

BellAntonie
Moderator

Hey there @Ang

Welcome to the Community and thanks for your post. 

This can be a result of a few different things, however the majority of the time it's simply due to your phone randomly disconnecting from the network. A quick fix is to fully power off your phone and wait a few minutes and power it back on again. If it doesn't resolve the issue, check your MyBell profile to review your status and seek out assistance if needed.

If the issue persists, check out our Mobility How ToOpens in a new tab or window section to learn more about tips and tricks when faced with network issues.

Give it a try and keep us posted if you still have any issues.

View reply in original post

WelshTerrier
Community All-Star
Community All-Star

The following steps are intended for iPhone users. You can recreate these same steps for the make and model of the phone you are activating. E.g. Samsung, etc. (Power off/on)

Let's try the following:

  1. Power your mobile phone off. Remove the SIM. Power you device back on.
  2. Now turn off your device by simultaneously pressing and holding the side button and either volume button until the sliders appear, then drag the Power Off slider.
  3. Reinstall the SIM while your device is powered off.
  4. Restart your device. If it does not respond, do a force restart. Press and do a quick release of  volume up & down buttons. Press & hold the side button until you see the Apple Logo appears.

You need to log in to MyBell with a web browser to verify whether you previously activated your new device. Go to & Select > Manage my device. If it is not active you need to: Select > Manage my SIM and device > Select > Transfer service to another device by following the prompts.

If you plan on transferring data from another device you can do so once your device is activated & the SIM is installed & recognized. I have included the following link to assist you in transferring data to your new device.

How to transfer data to your new device (bell.ca)

How to transfer my existing Bell Mobility service to a new SIM card or eSIM

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

View reply in original post

Thank you. I got my phone working. I had to take the SIM card out, wait a bit and then put the SIM card back in. 

View reply in original post

15 REPLIES 15

BellAntonie
Moderator

Hey there @Ang

Welcome to the Community and thanks for your post. 

This can be a result of a few different things, however the majority of the time it's simply due to your phone randomly disconnecting from the network. A quick fix is to fully power off your phone and wait a few minutes and power it back on again. If it doesn't resolve the issue, check your MyBell profile to review your status and seek out assistance if needed.

If the issue persists, check out our Mobility How ToOpens in a new tab or window section to learn more about tips and tricks when faced with network issues.

Give it a try and keep us posted if you still have any issues.

I just put my new SIM card in the phone and transferred my data, but I only see SOS in the right hand corner.  Help!!!

WelshTerrier
Community All-Star
Community All-Star

Power your mobile phone off. Remove the SIM. Power you device back on. Make sure you do a full reboot. Install the SIM when the device is completely powered off.. Power on & check your device. It should work. Failing this,  go back to where ever you purchased your SIM & have them check it out.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

My new 14 plus is stuck in SOS mode..

how do I get back to normal cellular mode?

Try the following two procedures on Apple iPhone 14plus:

1. Turn off iPhone

  • iPhone with Face ID: Simultaneously press and hold the side button and either volume button until the sliders appear, then drag the Power Off slider.

  • iPhone with the Home button: Press and hold the side button, then drag the slider

  • All models: Go to Settings  > General > Shut Down, then drag the slider.

2. Force restart iPhone

If iPhone isn’t responding, and you can’t turn it off try forcing it to restart.

  1. Press and quickly release the volume up button.

  2. Press and quickly release the volume down button.

  3. Press and hold the side button.

  4. When the Apple logo appears, release the side button.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

when i moved my sim card from a iphone xr and over to iphone 11 it does not connect to the bell network . This phone was previously on a Telus network but there is no lock on the phone , it is open . all i get is SOS connection . This might be something to do with my account be an grandfather account . Last time i tried upgrading with this same sim card i went from exact same iPhone xr to a Samsung s21 and had similar issue trying to connect to bell's 4g or Lte The sim would not connect . The plan i currently have is a very old plan it might have something to do with it ? but not sure why it will work with older iPhone xr on a 3G network . 

WelshTerrier
Community All-Star
Community All-Star

The following steps are intended for iPhone users. You can recreate these same steps for the make and model of the phone you are activating. E.g. Samsung, etc. (Power off/on)

Let's try the following:

  1. Power your mobile phone off. Remove the SIM. Power you device back on.
  2. Now turn off your device by simultaneously pressing and holding the side button and either volume button until the sliders appear, then drag the Power Off slider.
  3. Reinstall the SIM while your device is powered off.
  4. Restart your device. If it does not respond, do a force restart. Press and do a quick release of  volume up & down buttons. Press & hold the side button until you see the Apple Logo appears.

You need to log in to MyBell with a web browser to verify whether you previously activated your new device. Go to & Select > Manage my device. If it is not active you need to: Select > Manage my SIM and device > Select > Transfer service to another device by following the prompts.

If you plan on transferring data from another device you can do so once your device is activated & the SIM is installed & recognized. I have included the following link to assist you in transferring data to your new device.

How to transfer data to your new device (bell.ca)

How to transfer my existing Bell Mobility service to a new SIM card or eSIM

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

I had service earlier in the day now my phone is in SOS mode. I’ve turned my phone completely off and rebooted it and it is still in SOS mode. 

WelshTerrier
Community All-Star
Community All-Star

Welcome to the Community and thanks for your post. 

Can you elaborate & provide further detaills? Which device do you have? Which mobility plan do you subscribe to? Monthly or Pre-paid? Do you have an outstanding account balance and / or is your account topped up? Are you using your device within Canada? If not, does your device support the country you are trying to use it in?

This can be a result of a few different things, however the majority of the time it's simply due to your phone randomly disconnecting from the network. A quick fix is to fully power off your phone and wait a few minutes and power it back on again. If it doesn't resolve the issue, check your MyBell profile to review your status and seek out assistance if needed.

You can contact Bell at310-BELL or 1-866-310-BELL or *611 from any Bell mobile device or by internet Chat at: Contact Bell | Bell Mobility, Internet, TV and Home phone | Bell Canada

Thank you for contacting the Bell Community Forum.

Take care

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

Thank you. I got my phone working. I had to take the SIM card out, wait a bit and then put the SIM card back in. 

My phone recently died and I tried to put my physical SIM card into another handset (also from bell). It is showing “no service” - I’ve tried my last 2 previous handsets (both from bell) and the SIM is not connecting. What can I do to fix this?

WelshTerrier
Community All-Star
Community All-Star

Good Day & Welcome.

You should be able to move your SIM card to another phone providing the phone you are moving to is compatible.

If your Bell SIM shows "SOS" or "No Service" after moving it to another phone, it is likely due to a network provisioning delay, a locked device, or poor signal. Restart the phone, toggle Airplane mode, and ensure the SIM is seated properly. If it persists, confirm the new phone is unlocked and that your account & device are properly activated. There could also be an issue with the SIM card itself.  You can verify this by visiting a local Bell store and having the representative test your SIM card.

How to transfer my existing Bell Mobility service to a new SIM card or eSIM

For further assistance, you should call Bell Mobility Tech support at: 1 800 667-0123 or dial *611 from any Bell mobile device.

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

I live in Northern Ontario and we do not have cell service it says SOS ! Can only text others who have an iPhone from my wifi. I went into town (20 mins away) and it worked there. Anyone know why? Can’t get any answers from the Bell website and of course I cannot make a call to ask anyone!! 

Did you have service prior to this? If so, check here for outages in your area

https://support.bell.ca/Outage-Check

Other option would be to restart your phone. 

Big-TO