Username/password for accessing USB drives (Home Hub 4000)

bonestorm81
Contributor

Can anyone tell me what the username and pass is to access external USB drives that are connected to the Home Hub 4000. This request comes up when navigating to \\mynetwork or \\192.168.2.1

bonestorm81_0-1785712964974.png

 

 

0 9 257
9 REPLIES 9

WelshTerrier
Community All-Star
Community All-Star

Good Day & Welcome.

Have you setup file-sharing on your computer?
You can access a network drive on Windows by
opening File Explorer. Select > This PC, and choosing > Map network drive to enter your folder path.

  1. Open File Explorer, click the address bar, type your network path using double backslashes and your IP or hostname (e.g., \\192.168.2.1or \\mynetwork), and press Enter.
  2. Enter the username and password you set up in your modem settings if prompted.

Note: To find the default password on your modem:

  • Giga Hub 2.0/Giga Hub/Home Hub 4000 : Press the up/down arrows on the front of the modem until "Modem Management" is selected and press OK. (You can find your default password in the modem's screen menu under "Modem Management".)

Microsoft File-sharing over a network

Microsoft - File-sharing-over-a-network-in-windows

Note: If you open File Explorer, go to Network, and see an error message ("Network discovery is turned off…."), you'll need to turn on network discovery to see devices on the network that are sharing files. To turn it on, select the Network discovery is turned off banner, then select Turn on network discovery and file sharing.

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

Hello, thank you for the response.

I do not see a "Modem Management" option on the front of the modem

What I need is the username/password for this request when I navigate to \\mynetwork or \\192.168.2.1. 

bonestorm81_0-1785767294653.png

 

 

Good Day.

The default administrator password for a Bell Home Hub 4000 is the serial number printed on the sticker on the back of the modem, or it can be found on the small LCD screen by pressing the up/down arrows to select Modem Management and pressing OK.

Microsoft File-sharing over a network

Microsoft - File-sharing-over-a-network-in-windows

Note: If you open File Explorer, go to Network, and see an error message ("Network discovery is turned off…."), you'll need to turn on network discovery to see devices on the network that are sharing files. To turn it on, select the Network discovery is turned off banner, then select Turn on network discovery and file sharing.

Windows network credentials are the username and password of the specific computer or shared device you are trying to access on your local network. Entering them requires the target's login details, formatting the username correctly, or turning off password protection.

To turn off password-protected network sharing in Windows, open the Control Panel, go to the Network and Sharing Center, and change your advanced sharing settings.

  • Press the Windows Key + R, type control, and press Enter.
  • Click on Network and Internet, then open the Network and Sharing Center.
  • Click Change advanced sharing settings on the left side of the window.
  • Click the arrow next to All Networks to open that section.
  • Look for Password protected sharing.
  • Choose Turn off password protected sharing.
  • Click Save changes at the bottom.

To turn off the requirement for network credentials when sharing files in Windows 11, you need to disable password-protected sharing and clear any previously saved login details. (Clear stored network credentials - Credential Manager.)

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

bonestorm81
Contributor

Modem Management is not an option that's available on the front of the modem, I do have network discovery turned on and I turned off password protected sharing.

I did locate the serial number on the sticker on the back of the modem, is this the password that would need to be used to access \\mynetwork or \\192.168.2.1 ? What do I enter for username? I tried admin and guest.. I still can't login to this.

bonestorm81_0-1785780893284.png

 

Good Day.

Please refer to the instructions provided in my previous reply. Your modem password will not necessarily be the same as your Microsoft Network Credentials.

Without being there, it is somewhat next to impossible for me to provide you with the next steps. Have you reviewed the details I have provided to you earlier related to file sharing & network discovery? You can turn off password protection. This will eliminate the need for you to provide a Username and password to access your USB drives connected to your network.

Microsoft File-sharing over a network

To turn off password-protected network sharing in Windows, open the Control Panel, go to the Network and Sharing Center, and change your advanced sharing settings.

  • Press the Windows Key + R, type control, and press Enter.
  • Click on Network and Internet, then open the Network and Sharing Center.
  • Click Change advanced sharing settings on the left side of the window.
  • Click the arrow next to All Networks to open that section.
  • Look for Password protected sharing.
  • Choose Turn off password protected sharing.
  • Click Save changes at the bottom.

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

bonestorm81
Contributor

I think you are mis-understanding what I am asking.. I connected an external USB drive directly to the USB port on the Home Hub 4000 modem, how do I access the data on this drive from a computer on my network?

The modem does see the drive

bonestorm81_0-1785787745074.png

 

 

Is this an empty drive or a drive with existing data on?

If it has existing data on it, it should be the same username and password as used on the computer it was originally attached to. 

If it's empty, try:

user: Guest
password:

 

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

Hi, the drive does have data on it. user: Guest with blank password did not work.

I did try my computer login as well.. that also did not work.

 

 

 

Can you click on settings in the modem menu for that drive?

Not sure what it shows, but I am thinking it should allow to set a username/password for it.

You can also try using the remote credential rather than the local credential. If you are using network credentials it will look for the local account rather then the remote account. If you select different credentials you can use remote credentials from the SMB server.

  1. Open File Explorer and navigate to This PC.

  2. Click Map network drive in the toolbar. 

  3. Select a drive letter and enter the share path (e.g., \\ServerIP\ShareName).

  4. Check the box labeled Connect using different credentials. 

  5. Click Finish and enter the remote username and password when prompted. 

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.