How come my external hard drive won't work on my 9241 ?

Parry Sounder
Contributor

External hard drive on a 9241 not working- used it for years and now screen says it is not supported by Bell

0 3 94
1 helpful reply

Accepted Solutions

Thanks for your reply. After rebooting the receiver it worked the next day. This has happened to me on another receiver I have at our winter place not hooked up to a dish   We load up a hard drive with programs in the summer and take the hard drive south with us and watch a winters worth of recorded shows. 

View reply in original post

3 REPLIES 3

WelshTerrier
Community All-Star
Community All-Star

Good Day & Welcome.

Thank you @Parry Sounder for contacting the Bell Community Forum.

A hard drive not supported message usually means the device cannot read or access the attached storage device.  The hard drive has encountered a file system error, sector damage, or mechanical failure.

I can only think of 3 possible causes.

  1. A hardware issue with the 9241. Power cycle your 9241 receiver completely off by unplugging the power cord. Wait about 60 seconds, and plug it back in. Let the unit fully reboot before checking the drive.
  2. A faulty cable between the hard drive & 9241. Ensure the USB cable is firmly plugged into both the external hard drive and the USB port of the 9241. Try swapping the USB cable if you have a spare.
  3. Have you tried plugging the hard drive into a computer to see if you can access the contents? Unplug the drive from the 9241 and plug it into a Windows or Mac computer. Check if the computer recognizes the drive or if it asks to format it. (A computer may not be able to read your recorded TV files, but it will let you know if the physical drive or its enclosure/controller is dead.)

If after trying the above and the issue persists, it is very possible that the hard drive is failing & that you may need to replace it. Do you have another hard drive? If so, please plug it in and see if it will work.

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

Thanks for your reply. After rebooting the receiver it worked the next day. This has happened to me on another receiver I have at our winter place not hooked up to a dish   We load up a hard drive with programs in the summer and take the hard drive south with us and watch a winters worth of recorded shows. 

Good Day @Parry Sounder 

Thank you for your feedback by letting the community know that everything is now working for you. We are more than glad to have been of assistance to you.

Sometimes the simplest of solutions can resolve most software & hardware issues.

When troubleshooting common problems with phones, computers, streaming sticks, or Smart TVs, etc. following these steps will resolve the vast majority of minor software glitches, freezing screens, connection issues, etc.

  • Checking for error messages.
  • Ensure external drives are securely plugged into a working outlet.
  • Power-cycling your equipment completely off by unplugging the power cord.
  • Ensure the cables are firmly plugged in.
  • Swapping out the cables if you have a spare.
  • Testing the device or app out on another piece of equipment. This will determine whether the problem is with drive, app or the device that you are using.

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.