- Community Home
- Internet
- Re: How can I get full 8 Gbs speed using HH4000 us...
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-24-2024 11:31 AM - edited 09-24-2024 11:50 AM
I've been using Bell's latest 8Gbs internet service as a promotion offered in my area almost 2 years ago. Definitely overkill but the promotion was too good to pass up.
As I was investigating an unrelated Asus router's AiMesh network issues, Asus asked me to do a sanity check to verify speeds from HH4000 to Asus' latest gaming router and I found I was getting half of the speeds I've been paying for almost 2 years for! After further investigation, found it was unrelated to Asus hardware.
After the Asus AiMesh issue was fully resolved, I'm now left with this internet speed issue of never getting full 8Gbs.
Some important details:
- All firmware is latest on all devices
- HH4000 (connected 10g port) to (CAT8 cable) to Asus BE98 Pro (connected 10g port)
- HH4000 onboard Speedtest (~8Gbs speeds) and Asus BE98 Pro onboard Speedtest (~4Gbs speeds)
- Nothing else is connected to the router when performing the speed test. Just 1:1, HH4000:Asus router
- Sanity check: HH4000 (connected 10g port) to (CAT8 cable) to Sonnet Echo Express (connected 10g port) to (Thunderbolt 3) to HP 360 laptop (Thunderbolt)
- HH4000 onboard Speedtest (~8Gbs speeds) and HP laptop Speedtest (~4Gbs speeds)
- After escalating the issue, Bell Level 2 put my residential HH4000 into bridge mode (as I heard this would help remedy the PPPoE overhead) but didn't make any improvements to the internet speed
Has anyone found a way to get FULL 3Gbs/8Gbs speeds from HH4000 to 3rd party router or found a workaround or is this a known Bell/PPPoE limitation?
If not, why does Bell offer 8Gbs residential service if they know that their users would never reach these posted speeds?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-20-2026 10:56 AM - edited 08-20-2026 10:58 AM
Why is it that Bell has such an issue with people running their own hardware behind their ONT.. WHY would Bell limit or make it hard to do this? The Giga Modem IS AN ONT and Media converter already it makes no sense to not use it.. I have been on the phone for hours with Bell trying to find the reason for this.. WHY on a 3000mbps connection do I only get 400 mbps SOMETHING is a bottle neck and it is NOT my equipment. My Unify equipment is 100% capable of handling this. I DO have my residential Giga modem in bridge mode as a very kind Bell Supervisor in Tier 2 enabled it for me to test and see if this is the issue and I can see on the status screen it says its in bridge mode. But my UX7 is at 20-30% CPU when doing a 400mbps speed test so it is not the bottle neck here and when i setup the Advanced DMZ I could get great speeds like 2500 gbps but Bell was screwing up the DHCP leases and causing my network to go down every 5-10 minutes for ~10 seconds.
Does Bell have absolutely no clue what they are doing here, every other ISP can do this but Bell cannot for some reason. Someone at Bell has created this restriction for some reason and no one is explaining why. I have a Giga Hub 2.0 coming to me to see if that makes any difference but Bell is going to loose me as a customer if they cannot figure out how to give me the speeds I pay for. I love Bell and their network is rock solid but I DO NOT appreciate that anyone form their teams can look at my SSID and wifi password and could give that to ANYONE for any Reason.. OR give a user the ability to OPT out of Bells ability to see inside the modem without consent. I have to push a button on my router to allow Bell in not just anyone can access this without permission.. Anyways I am not apposed to getting a Dream Router 7 so i can do the ONT myself in that device. I just really wish Bell would give us a good reason why I cannot run my own equipment behind an internet connection I PAY FOR
Bell is so frustrating right now!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-20-2026 01:10 PM
The core of your question, "Why does Bell still use PPPoE?" was answered comprehensively several years ago on Reddit. If you Google that question, the answer will be right there in the thread, "Please help me understand PPPoE". The thread also explains why Bell Aliant does not use PPPoE.
The answer in one word is "history". And in three words, "Sympatico Access Manager". If you ever used that software, you are, like me, older than dirt.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-20-2026 02:10 PM
While there are currently issues with PPPOE passthrough affecting speeds, I doubt the UX7 would be able to handle 3/3 Gbps PPPOE connectivity.
I tried an UMD Pro SE with a GPON directly and it struggled at 1.5/1 PPPOE. It all depends on the resources available and the individual configuration, number of connected devises etc...
You would have to try it once the issues with PPPOE have been resolved. I still think it will struggle based on my experience with a more advanced Ubiquiti product than the UX7.
It's likely the main reason why they do not support equipment besides their own supplied units, as PPPOE will cause a large amount of overhead.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-20-2026 02:26 PM
No I 100% get that.. IMO the Giga Modem needs to be the ONT and Media converter and do all the PPPoE for the users.. It's quite literally designed to do that! That's what I was trying to do with the Advanced DMZ and could get full speed but DHCP was doing something really weird! I kept only getting 10 minute leases from Bell for my IP address. I am not sure if that is normal or not but was causing all kinds of issues
- « Previous
-
- 1
- 2
- Next »
New to our forum? These guides will help you find your way around quickly.
- Welcome to the Community!
- Log in/Register
- Community guidelines
- Community help
- Meet the Moderators
- Bell Community All-Stars
- How to send a private message
- Existing customers, login to MyBell to see exclusive offers
- What's on Crave
- What's on Free Preview
- Mobility phone & device catalog
- Latest in the Community

