- Community Home
- TV & Streaming
- Re: Fibe TV HDPVR recordings disappear immediately...
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-09-2022 06:18 PM - last edited on 12-17-2025 03:02 PM by BellPatricia
My Bell Fibe is no longer keeping my recordings. As a test I did a live record and right after it shows as complete it disappears from my recordings list. I've tried various combinations including 'keep till I delete' but to no avail. It shows up in My Recent Recordings while it is recording but the just disappears upon completion. I've power cycled the PVR to no avail. My space available shows only 15% used so that's not the issue... Help!
- Labels:
-
Fibe TV app
-
HD PVR
-
Recording
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-12-2026 08:55 AM - edited 10-12-2026 09:01 AM
Hi @Fat1961
Thank you for your post and welcome to the Community.
We're sorry to hear this and can certainly understand how frustrating this can be.
Are you able to confirm which TV receiver model you have and what the issue you're experiencing with it is?
Based on what is occurring, it sounds as though you would have our VIP2262 or VIP5662 PVR model. In order for your recordings to remain, the receiver would need to be plugged in and turned on, as recordings are stored locally on the built in hard drive, so if the receiver is not powered on, the recordings won't be saved / accessible.
Looking forward to hearing back.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-12-2026 10:23 AM
What does a cloud based receiver do that an Apple TV 4k doesn't? Will some shows still disappear after a day or two? They convinced me not get another 5662. Do It need a receiver at all?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-12-2026 10:37 AM - edited 10-12-2026 10:55 AM
Good Day & Welcome
Thank you @Fat1961 for posting your question.
The VIP5662W is a traditional, legacy Bell Fibe TV set-top box that relies on an internal physical hard drive to store recordings.
A Cloud-Based PVR, such as Bell’s VIP7802 box or Bell's hardware-free streaming service, replaces the physical hard drives with online network server storage for your recordings.
- Recordings are stored for up to 60 days & then they are automatically deleted. It stores up to 320 hours of recordings. If you hit your maximum hour limit, older recordings begin deleting automatically to make room for new ones, starting with the oldest file first.
The Apple TV 4K is a high-performance streamer, that does not include a TV tuner. It does not have a hard drive but lets you stream Bell Fibe TV via the Fibe TV App. It also allows you to stream and have access to other applications.
Let us know if you have any further questions.
Take care.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-12-2026 11:14 AM
I am able to record most shows through my Apple TV 4K although some disappear quickly. How is this possible with no receiver plugged in at my house?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-12-2026 11:20 AM - edited 10-12-2026 12:12 PM
Hi @Fat1961
Will some shows still disappear after a day or two?: With Cloud based recordings, they will not disappear after a day or two. They are saved for 60 days (as indicated by @WelshTerrier ).
They convinced me not get another 5662. Do It need a receiver at all?: No receiver is required with our Equipment-free TV (details below).
I am able to record most shows through my Apple TV 4K although some disappear quickly. How is this possible with no receiver plugged in at my house?: This function may still be working to some small degree, but the reason the recordings are not maintaining and are disappearing is due to the HDPVR being unplugged / malfunctioning. While the recordings may show within your list, they will disappear or possibly not work.
The Cloud based receiver is our VIP7802 and does not have a built-in hard-drive. Any recordings made when on our Cloud service will be saved to the Cloud and can be accessed on your devices where you have the Fibe TV App installed.
The Cloud service is not available with traditional equipment, such as the VIP5662. The reason your recordings are currently disappearing is because your VIP5662 is malfunctioning or not plugged in and powered on. To switch over to our Cloud service you would either need to migrate your equipment from the VIP5662 to our VIP7802 through customer service (rental of the receiver is $10.00/month) or we do offer an Equipment-free service.
Equipment-free TV can be done through your MyBell profile under the TV section. You would select the "Go hardware-free" option under the My Equipment section. By migrating to the Equipment-free service, you will automatically be switched to the Cloud based service and you can continue watching your television content, manage, schedule and watch recordings on any of your device's that are compatible with the Fibe TV App. Any current receiver you have would need to be returned (if on rental / owned by Bell).
If you have any further questions, please do not hesitate to contact the Community.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-12-2026 11:39 AM
Good Day.
Thank you @Fat1961 for your follow up question.
You can watch, manage, and set PVR recordings using the Fibe TV app on an Apple TV 4K if you have an active Bell Fibe TV subscription & the VIP5662W is plugged in and the physical hard drive is working properly. If it is not plugged in & it is not working properly, then this is the reason why you are experiencing issues.
Telltale signs of a failing hard drive on the Bell VIP5662W 4K PVR include missing or incomplete recordings, frequent system freezes, and general playback error. Recorded programs vanish shortly after being saved or fail to record at all despite available space. Video and audio fail to play or show a black screen. Shows can cut off early or get split into separate, broken files, etc.
Apple TV | Bell Support : Setting up a network connection for the Fibe TV app
Take care.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-17-2026 09:41 AM
I have same issue. Did you get it resolved?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-17-2026 10:23 AM
Good Day & Welcome to the Bell Community Forum
Thank you @Andy5 for posting your question.
We're sorry to hear this and can certainly understand how frustrating this can be. Could you please explain exactly what you mean by: "I have the same issue."
What is the model number of your Fibe TV receiver? E.g. VIP5662w, VIP2262, etc.
Are your recordings still available for you to view on your PVR receiver? Are you experiencing any other issues?
For example, the VIP5662W is a 4K Whole Home PVR with a built-in 1 Terabyte (TB) storage module, allowing it to record significant content, typically holding around 150 hours of 4K or 320 hours of HD. Please verify that you have sufficient free space on your PVR to store additional recordings. You can easily check this out by selecting > Menu on your remote control. Scroll down & Select > Settings. Select > System info. Select > System information. Select > System resources - Check the Disk usage space that is remaining. If there is insufficient space available, you will not be able to add recordings until you create space on the physical H.D. by deleting previously stored recordings.
Bell Fibe TV recordings will also delete if your physical receiver isn't connected or is not working properly.
Have you tried to do any troubleshooting? If not, please do so.
- Start with the modem. Power it fully off. Wait 30 sec. and power it back on. Check for any error messages.
- Now do a full reboot / power off and on with your PVR.
- Try recording any program & see if you are experiencing the same issue.
If after rebooting your equipment, you continue to experience PVR recording issues, I would contact Bell Customer Service Fibe TV tech support & speak with a technical support representative who will be able to determine whether your receiver is defective or not. Should your receiver need to be replaced. Please call: 1 866 797-8686
It is very possible that the hard drive is no longer functioning properly. Telltale signs are incomplete or multi part recording, blank recording, freezing, difficulty accessing recordings, etc.
Take care.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-18-2026 07:26 AM
I discontinued my receiver and went wireless using the fibe app to help resolve but it still showing a connection to the receiver- I think- how can resolve that?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-18-2026 08:37 AM
Good Day.
Thank you @Andy5 for providing us with this additional information.
You will continue to experience issues if your Fibe TV HD PVR receiver is not plugged & is not working properly.
As I mentioned previously, I would contact Bell Customer Service Fibe TV tech support & speak with a technical support representative who will be able to determine whether your receiver is defective or not.
It is very possible that the hard drive is no longer functioning properly. Telltale signs are incomplete or multi part recording, blank recording, freezing, difficulty accessing recordings, etc.
Please call Bell Fibe TV Tech support at: 1 866 797-8686
Take care.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-21-2026 08:02 PM - last edited on 10-22-2026 09:11 AM by BellPatricia
In the last few days, shows only recently recorded on the PVR are getting deleted after only a few days. Never happened before! Is this a new restricted policy at Bell?? They always seem to be restricting the service more and more!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-22-2026 05:41 AM - last edited on 10-22-2026 09:11 AM by BellPatricia
Good Day & Welcome
Thank you @Larry613 for posting your question.
We would like to assist you. You mentioned that recordings "on the PVR are getting deleted after only a few days." Can you please provide us with some further information?
Which Bell TV service do you subscribe to? Fibe TV or Satellite TV. Please provide us with the model number of your Fibe TV or Satellite TV PVR receiver? E.g. VIP7802, VIP5662w, VIP2262, 9500, 9400, etc.
A Cloud-Based PVR, such as Bell’s VIP7802 box or Bell's hardware-free streaming service, replaces the physical hard drives with online network server storage for your recordings.
- Recordings are stored for up to 60 days & then they are automatically deleted. It stores up to 320 hours of recordings. If you hit your maximum hour limit, older recordings begin deleting automatically to make room for new ones, starting with the oldest file first.
The Bell VIP5662w, VIP2262 PVRs rely on an internal physical hard drive to store recordings. TV recordings can delete if your PVR receiver is not connected or working properly.
Are you experiencing any other playback or recording issues? If so, it is possible that the hard drive is no longer functioning properly.
Telltale signs of a failing hard drive on a PVR include missing or incomplete recordings, frequent system freezes, and general playback error. Recorded programs vanish shortly after being saved or fail to record at all despite available space. Video and audio fail to play or show a black screen. Shows can cut off early or get split into separate, broken files, etc.
How much space do you have remaining to store recordings on your PVR?
- Please verify that you have sufficient free space on your PVR to store additional recordings. If there is insufficient space to store recordings, you will need to delete some of your recording in order to create storage space.
Have you tried to do any troubleshooting? E.g. Power cycled your Bell modem and PVR, etc.
- Start with the modem. Power it fully off by unplugging the power cord. Wait 30 sec. and power it back on. Check for any error messages.
- Now do a full reboot / power off and on with your PVR by unplugging the power cord.
- Try recording any program & see if you are experiencing the same issue.
If after rebooting your equipment, you continue to experience PVR recording issues, I would contact Bell Customer Service Fibe TV tech support & speak to an agent. The support representative will be able to determine whether your receiver is defective or not. Please call: 1 866 797-8686
Let us know if we can be of further assistance.
Take care.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-17-2026 05:35 PM - last edited on 11-18-2026 08:24 AM by BellNick
Everything seems dowloaded properly with Fibe APP and the recordingas are saved but only for 24 hours.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-18-2026 12:53 PM
I have set up for Fibe TV and am not currently using any Bell receiver - everything is working great except all the recordings are only kept for 24 hours. Clearly I am missing something but I have not been able to find it.
I would appreciate any help as my two attempts to go through for help by phoning in did not get me anyone who could answer it . Thank you
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-18-2026 01:04 PM
Good day @Paul mac
Welcome to the Bell community and thank you for your post 🙂
That would be frustrating, and we'd like to gather a few more details to better understand what's happening with your recordings.
Could you please let us know:
- Are you using the Fibe TV app only (for example, on Apple TV, Fire TV, Android TV, or a smart TV), or do you also have a Bell TV receiver active on the account?
- Which Fibe TV package do you currently subscribe to?
- When you schedule a recording, does it appear in your Recordings list initially and then disappear after 24 hours, or does it show an expiry date?
- Approximately when did you notice this issue begin?
Hope to hear from you soon,
New to our forum? These guides will help you find your way around quickly.
- Welcome to the Community!
- Log in/Register
- Community guidelines
- Community help
- Meet the Moderators
- Bell Community All-Stars
- How to send a private message
- Existing customers, login to MyBell to see exclusive offers
- What's on Crave
- What's on Free Preview
- Mobility phone & device catalog
- Latest in the Community
Popular links
| User | Likes Count |
|---|---|
| 1206 | |
| 264 | |
| 164 | |
| 59 | |
| 52 |

