Giga Hub 2.0: PPPoE passthrough/2nd PPPoE session capped (average 330 Mbps) on 3 Gbps plan

Velaris
Contributor II

Hello,

I'm on a 3 Gbps plan and I'm seeing a repeatable/hard throughput cap only when using PPPoE on a downstream device (PPPoE passthrough / second session).

My setup:

- Bell Giga Hub 2.0
- Downstream router: UniFi Cloud Gateway Fiber (UCG-Fiber) connected to the Giga Hub 10G port

What works:

- If the UCG-Fiber WAN is set to DHCP (e.g. behind the Giga Hub 2.0/double NAT), I can reach full speed (~3 Gbps).
- If my PC is behind the Giga Hub 2.0 on DHCP, my PC (1GbE NIC) reaches the expected ~1 Gbps.

The problem (reproducible):

When I establish a PPPoE session from a device behind the Giga Hub, throughput is capped around ~300–330 Mbps.

Repro 1: PPPoE from UCG-Fiber

- UCG-Fiber WAN set to PPPoE using my b1 credentials
- Result: ~300–330 Mbps (repeatable), despite 3 Gbps plan

Repro 2: PPPoE from a Windows PC (bypassing UCG-Fiber)

- PC connected by Ethernet to the Giga Hub 2.0
- PC NIC: 1GbE, cable: Cat6A
- Created a Windows "Broadband (PPPoE)" connection using the same b1 credentials
- Result: same cap at ~300–330 Mbps (repeatable)

Because the same cap occurs even when PPPoE is established directly from a PC (*no* UniFi router involved), it points to the Giga Hub 2.0 PPPoE passthrough / secondary PPPoE session path rather than my router.

Can you confirm:

- Is this a known issue on the Giga Hub 2.0 (firmware-related)?
- Is there a firmware update or hardware replacement option to resolve PPPoE passthrough speed caps?

Thanks

4 171 16.9K
171 REPLIES 171

MrCaspan
Contributor III

No don't reboot LOL 

Also feels a bit 1984 in here and people getting disappeared and all existence of them erased. Scary coming from a company like Bell.. if willing to do stuff like this publicly, imagine what happens outside of the public eye. Do better Bell!

 

Not sure why the image isn't displaying but I am on Giga Hub 2.0 with 3.11.6.1 Hardware version 5697-000001-000. Sorry for all the false hopes guys 😅

AquaGoat
Contributor II

I am experiencing this exact issue. I have speed test logs and I can see that on June 25th I stopped getting my full 1.5Gpbs and starting getting around ~400Mbps, over PPPoE to my UXG-Max. Nothing in my network changed except the firmware of my GigaHub.

@BellPatricia If this is a known issue, can we get an update? I am paying for a service you are failing to deliver, and it's going on months now.

yokushka
Contributor II

2026-10-16 GigaHub firmware was updated to 3.11.6.4 and now PPPoE issue is resolved. I had a few reboots, no regression. Thank you Bell.

yokushka_0-1793470275081.png

yokushka_2-1793470357131.png

yokushka_3-1793470459931.png

 

dks
Community All-Star
Community All-Star

Thank you for the update. 

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

How were you able to get them to update you to 3.11.6.4? I called multiple techs and they told me that the most recent version is 3.11.6.2. I also only have a Gigahub 1.0

Back in May I had a problem with the over the air firmware update. I called the tech support line and they were able to send me an older modem with the old firmware. This solved my problem until last week when I had a power surge and it shorted that modem. The replacement modems they sent me all have firmware 3.11.6.2, which has the PPPoE bug limiting traffic to 300/300 on a 3gbps plan. Every tech insists the problem is my router and that Bell simply does not support PPPoE passthrough because it's company policy. Absolutely infuriating. 

Hi, this is unfortunate. As I understand the process, you'll need to be patient. It can take some time for the new firmware to propagate to your area. Based on past experience, it may take up to a few month.
Nothing special was done on my side, and there have been no updates to the Bell infrastructure in my area, at least none that I've noticed.
Best wishes.