Gigahub Crashing Under Heavy Load

AjaxResident
Contributor II

Hi y'all, 

Problem here with my Gigahub. As the title suggests, my Gigahub has a problem when heavy usage is detected. 

Specifically it's with games with high P2P connections such as Hell Divers 2 for example. Without exception the modem will crash and end up restarting itself every single time games like that are played. 

I've attempted a full re-install of the affected software, run Advanced DMZ for the affected PC, and attempted to PPPoE my PC, all to no avail.

What solutions are available for this frustrating issue? Should I buy a new modem and just use the Gigahub in bridge mode (assuming it has one)? 

0 6 242
6 REPLIES 6

Vanadiel
Community All-Star
Community All-Star

The giga hub does not have a true bridge mode, so you cannot buy a different modem to use on the Bell network.

Are there any error codes on the display when this crash happens? 

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

Unfortunately no error codes seem to appear. It's just a full forced restart of the modem. 

Good day @AjaxResident 

Thank you for reaching out to the Bell community 🙂

That would be very frustrating, and we want to gather more details in order to help as best as we can.

Which model of modem do you have (Giga Hub / Giga Hub 2.0), and which Firmware version do you have? Can you clarify if you are connected directly to the Bell modem or if you are using a third party router? 

A few things I'd recommend checking:

  • Confirm whether the modem is performing a full reboot (LED goes through the normal startup sequence after the disconnect).
  • Check the modem event logs in your modem GUI after a crash for any errors or restart events.
  • If possible, test with another P2P-heavy application or game to see if the issue is reproducible.

Keep us posted,

@BellPatricia 

Hi thanks for the reply!

We have the regular Giga Hub. Firmware is Version 3.11.6.3. I am connected directly to the Bell Gigahub through Ethernet with no third-party modem in between. 

  • The modem is going through a full reboot. LEDs go through normal startup.
  • The only logs relevant to the crashes are "ppp0:TR69 unable to send Inform message" which I assume is meaning it cannot connect to Bell servers for some reason.
  • P2P-heavy applications all crash the modem after some time. 

 

Hi there @AjaxResident 

Thank you for your reply, we appreciate the additional details. 

We would like an opportunity to take a closer look at this so I will send you a private message to get some more information.  Please check your Messages within your profile avatar in the top right corner.

Unsure how to check or send a private message? See How to send a private messageOpens in a new tab or window

@BellPatricia 

MGJV
Contributor

If you are still dealing with this, try turning off GUARD (all functions) in WIFI app.  I've had issues with EUFY camera for 3-4 months as well as games, all seeming to relate to P2P/NAT overload.   I turned off all of GUARD options this morning and 'suprise' - started working no problem after a re-boot.   It is pretty sad that the Bell Hardware offerings are notorious for Bugs/NAT issues with people trying to use a third party router, and fighting bugs (staying through several successive generations of hardware) that prevent that with it all seeming to be very unstable, as a 'standard' solution.   Maybe just FIX IT Bell.