UPS - Uninterrupted Power Supply

tricci57
Contributor II

I have seen a few posts on this subject, but no concrete answer was given. 

Here I go: 

1 - what is the most preferred, recomended, likely UPS system to keep the system up when there is a power outage?

2 - with only the Phone, (and maybe the Internet and TV) plugged in, how long can the suggested UPS last?

I appreciate a straight forward non technical suggestion, . . . NSA

Tom

 

0 9 3,433
1 helpful reply

Accepted Solutions

ZaneP
Community All-Star
Community All-Star

Hi @tricci57 

Re your questions:

  1. APC, Tripplite, CyberPower are popular manufacturers.
  2. The UPS could provide power between 1-4 hours, depending on the demand placed on it. It's a "how long is a piece of string" question. You'll need to read its specs when you are ready to choose one. I did suggest that you look into the power demands of your TV.
  3. For your needs you should be able to buy one for less than $200, before taxes and shipping (if required)

Here's a reasonably priced UPS that should be able to meet your requirements: The APC UPS 600VA (BE600M1). It's $90 + tax and shipping from a well-known online retailer: https://amzn.to/3ykHHvD

This APC model has 850VA and a few more features. $165 + tax. https://amzn.to/3yN1mGc

Always worth seeing what's available from a store in your area.

Bear in mind that a UPS is not meant to power equipment as a replacement for AC power. Its job is to give us time for an orderly shutdown of our gear and is definitely not meant to run a printer. 

Good luck and keep us posted!

Cheers,

ZaneP

I'm not a Bell employee just a customer

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

View reply in original post

9 REPLIES 9

ZaneP
Community All-Star
Community All-Star

Hi @tricci57 ,

A few things to keep in mind.

You'll need one which has 350VA (volt-ampere), to power your Bell modem.

If you're planning to keep your TV and Bell's TV receiver powered via the UPS, the VA capacity will need to increase. You can get the specs from your TV manufacturer. I don't have info on the receiver's specs. We'll need an approximate VA total.

What's your budget for a UPS? Recommendations should be aligned with that amount.

Let us know!

 

 

 

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

tricci57
Contributor II

mo


@tricci57 wrote:

I have seen a few posts on this subject, but no concrete answer was given. 

Here I go: 

1 - what is the most preferred, recomended, likely UPS system to keep the system up when there is a power outage?

2 - with only the Phone, (and maybe the Internet and TV) plugged in, how long can the suggested UPS last?

I appreciate a straight forward non technical suggestion, . . . NSA

budget?, well I am on pension and limited income......... but if I need to psend a cople of dollars to get the what I need, then i'll dig a bit deeper.  Really i m looking at 150 or 200 dollars.........


 

ZaneP
Community All-Star
Community All-Star

Hi @tricci57 

Re your questions:

  1. APC, Tripplite, CyberPower are popular manufacturers.
  2. The UPS could provide power between 1-4 hours, depending on the demand placed on it. It's a "how long is a piece of string" question. You'll need to read its specs when you are ready to choose one. I did suggest that you look into the power demands of your TV.
  3. For your needs you should be able to buy one for less than $200, before taxes and shipping (if required)

Here's a reasonably priced UPS that should be able to meet your requirements: The APC UPS 600VA (BE600M1). It's $90 + tax and shipping from a well-known online retailer: https://amzn.to/3ykHHvD

This APC model has 850VA and a few more features. $165 + tax. https://amzn.to/3yN1mGc

Always worth seeing what's available from a store in your area.

Bear in mind that a UPS is not meant to power equipment as a replacement for AC power. Its job is to give us time for an orderly shutdown of our gear and is definitely not meant to run a printer. 

Good luck and keep us posted!

Cheers,

ZaneP

I'm not a Bell employee just a customer

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

Great material, thanks.  I am on my way !

I am purchasing a UPS for my Whole Home 4000 Modem.  I have a choice,simulated vs. Pure sine wave output.  Cost is the driver here but will the modem work with either?

Good Day & Welcome to the Bell Community Forum.

The HH 4000 modem will work either way. As you mentioned, there is a significant difference in price when purchasing one vs. the other.

It becomes a matter of choice & ultimately the cost.

The incoming utility power is typically a pure sine wave and this is what connected equipment normally use.

If the UPS system detects a power disturbance such as a power outage, a spike, over- or under-voltage condition, or frequency change, it will use it's battery to correct the condition and restore clean power. It is only when on battery power that the sine wave becomes a consideration. 

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.

Thank you for your very clear and prompt reply.

HLo36
Contributor II

Based on my experiences only. My main goal is not have interruptions when the lights blink due to a few seconds outage or voltage drop. 

Currently with my GigaHub I have a APC Pro 1000S. I have my 24-ports switch and couple other things on there also. I have a power outage couple weeks ago (local tree issue), it lasted me about 1.5 hrs. I supposed I could turn off the switch to save some juice but I doubt it will last the whole 2 hrs when Toronto Hydro fixed the issue. 

I have another CyberPower 1500VA that is supporting my ASUS RT-AX86U in Access Point mode, that one lasted over 2 hrs and still have another hr left. I used that to charge my phone up also. 

Just like others have said, UPS will keep things going for short outages and allow you to charge up couple devices if necessary. They will beep like crazy the whole time. If you see 15 mins of power left, time to turn it off unless you know for sure the power will be back on before it runs out. 

For short outages people can keep on using the wifi devices without switching over to data. Very important requirements in modern household. 

WelshTerrier
Community All-Star
Community All-Star

Good Day.

Thank you for  sharing your setup, usage & expertise with your UPS battery backup.

Take care.

I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.