Good Day.
Have you tried to reset your remote control to the factory defaults? To reset your remote control to factory settings:
- On your remote, press and hold the Options button for 3 seconds, until the green light flashes twice.
- Within 10 seconds, enter 0000.
- Press Select.
- The green light will blink twice to confirm the commands have been successfully cleared.
Now that the remote has been reset to factory settings, the next steps will guide you through programming the remote using the appropriate code.
Program the Slim remote using a universal code
- Press and hold the OPTIONS button for 3 seconds until the TV light flashes twice.
- Enter 0001 universal code using your remote. You must enter the code within 10 seconds.
- Press and hold the POWER button. The TV light will slowly flash as it cycles through all the TV manufacturer codes until the TV turns off.
- Once your TV turns off, release the POWER button and press SELECT. The TV light will flash twice to confirm it has been successfully programmed.
- Test the TV commands (volume, power).
If you were unable to locate your TV brand, you can look up your code manually or choose an automatic code search.
If you are still unsuccessful in programming a code that matches your TV brand, there may be a problem with the remote that you are using. You could order a replacement remote control. There is no guarantee that this will solve your remote code programming code issue.
To
order a replacement remote from Bell online, please use the following web link:Bell Fibe TV - Equipment - Remotes
Remotes | Fibe TV | Bell Canada
Please refer to the model, Bell Slim remote. It costs $30.00 + Tax.
Thank you for reaching out to the Bell Community Forum.
Take care.
I am a Community All-Star and customer. I'm here to help by sharing my knowledge and experience. My views on Bell and the Community Forum are my own and not the views of Bell or any of its affiliates.
