Starlink and interference with Bell Satellite

[Nash211]

Does anyone have Starlink and Bell Satellite, do they notice any interference with Satellite, pixels picture quality, programing issues etc, My dish is approximately 10 feet away from the starlink dish

[dks]

Interesting question. Are you seeing that kind of interference? It would be surprising in that both are simply receivers. Bell's equipment has to be certified by Industry Canada, as well. 

[Nash211]

Well it is one of 2 things, either the Bell 9500 is having issues as of past month. I get some pixelation, but mostly  loosing timers, if you look at info, the receiver cancel the timers. and had some channel programing etc maybe that is corrected.  It just cancels the timers. Had some guide issues as well. Remote issues as well, but changed the channel maybe corrected that.  I bought it from a Bell dealer supposedly it is new, but refurbished Hard drive, also read it could be  the Hard drive causing the issues. So it is either the refurbished hard drive or the Starlink can be the culprit, which is more feasible.

[Nash211]

I am going to try move the Starlink Dish to another location see if that corrects the problem

[dks]

I suspect your issue may be more related to the hard drive. Let us know if moving the receiver makes a difference. 

[Nash211 · Accepted solution]

Well i took a different direction, I re hooked up my 9400, left the starlink dish where it is. If the issue resolves itself then it may be the 9500 hard drive or receiver itself. Then the next step if the problem still exists.  I will move the starlink dish, if the problem still exists, I will shut off the starlink see if that resolves the problem. Keep you informed. 

[Nash211 · Accepted solution]

Bell 9400 working properly, so will investigate Hard drive on the 9500