Internet | Bell Community Forum

Resolved! Which pods should I use?

I am debating between renting bell wifi pods and purchasing goggle wifi. What’s everyone’s thoughts

Resolved! Home Hub 3000 stops LAN traffic after a while

Hi, I'm hoping someone can help understand what is going on here.I have a #Home Hub 3000 setup with both a normal wifi network and a guest networkFor my work, I do testing where I'll have different devices and machines needing to communicate on the l...

Resolved! Wireless Internet waitlist / availability

Asking how to get on a wait list with Bell for rural wireless internet. I have Fibe available with poor speeds of 10/1, which is very slow for todays requirements. Have been told someday, Bell will increase the local tower for wireless but no one c...

What is the default username and password for access to the Wireless Home Internet antenna status?

I forgot the default username/pw to access WHI ANTENNA status because it’s been a while since I accessed it. It’s the login under 192.168.3.1 . I thought maybe it was : root and pw: admin , but that doesn’t work. Thanks for your assistance!

Resolved! Whats the lowest Internet speed to tolerate - wifi doesnt reach everywhere even with 2 pods?

I recently got the 1.5G internet and 2 pods as my place is on 2 floors. I have noticed that the speed tests on my phone vary depending on which room I am in between 170mbs to 670mbs.Unfortunately the 2 main rooms upstairs (modem is downstairs) do not...

Resolved! Bell 2000 not registered on Wi-Fi list after power outage

I had a power interruption last night at ten pm and the modem did not show on the list when the power came on. I did everything mentioned in the app several times and all seems to be fine and checks out except the modem doesn’t register on any device...

Resolved! Home Hub 4000 5GHz advanced settings not working

I have the HomeHub 4000. I am in a residential area with lots of wireless signals and the optimise my wifi is complete pants, everything just sits in the same channel. I unchecked that option and can set the 2.4GHz signal to a less crowded channel (...

Resolved! Giga hub: How to have all available channels for changing wifi broadcast

I have just received and setup my Giga hub. Its a pretty slick unit but I have one concern that could be seriously frustrating.In my neighbourhood, I have a large number of neighbouring wifi signals and in the past I manually changed the channel for...

Resolved! Can i use my own router with Bell 5g wireless home internet

Can i use my own router with Bell 5g wireless home internet. i just want to plug the ethernet cable coming from dish via POE injector, into my own router. I can do this with Rogers 5g dish which is sitting along side the new Bell dish. Tech support s...

Resolved! Home Hub 2000 + uninterrupted power supply (UPS)

I live in an area that experiences a lot of power outages which cause delays in service and power surges when it comes back on causing my modem to malfunction needing a replacement. I'm thinking of buying an uninterrupted power supply (UPS) to power ...